User manual CLARION DVS9755Z INSTALLATION MANUAL

[. . . ] DVD VIDEO SYSTEM DVD video is a high-quality digital video source that provides crisp and clear images. One 12 cm disc contains either one film or four hours of music. The built-in 5. 1 channel surround and the Dolby digital 5. 1 channel surround let you enjoy a realistic sound that emulates the sound of a movie theater. 2. For your safety, the driver should not watch the TV or operate the controls while driving. [. . . ] · Keep the door closed at all times to prevent dust from entering the unit. Skipping tracks (to locate the beginning of a section) Press the [ ] or [ ] button during playback. The number of tracks corresponding to the number of presses are skipped and playback is resumed. · Press the [ ] button to start playback from the beginning of the next track. ] button to start playback · Press the [ from the beginning of the current track. When this button is pressed again within 1 sec, playback starts from the beginning of the previous track. Fast forward/fast backward Hold down the [ ] or [ ] button during playback. When one of these buttons is held down, fast forward or fast backward starts within 1 sec. Normal playback speed is resumed when the button is released. · Intermittent sound can be heard during fast forward or fast backward playback. ] and [ ] buttons are also used · The [ to locate the beginning of a section. When one of these buttons is held down for 1 sec or less, the beginning of a section is located and playback starts from there. Playing back discs Press the [ ing the [ ] button to start playback. Press] button again stops playback. DVS9755z 17 Control unit button operations Setting acoustic features (ADJUST MODE) In this chapter, the control unit buttons are used. Selecting adjust mode settings Adjust the settings to suit your sound system. Press the [ADJUST] button to enter the ADJUST MODE. Press the [ ] or [ ] [DISP] button to select item to set. Each time the [ ] or [ ] [DISP] button is pressed, the indications change as shown below. Adjust automatic sound format identification (FORMAT) Set speaker to on or off (SP-SEL) Set speaker filter frequency (FILTER) Adjust speaker output level (SP-GAIN) Set speaker delay time (DELAY) Set Dolby digital (Dolby D) Set parametric equalizer (P. EQ) Press the [ADJUST] button to return to the original mode. ·A flow chart is shown on the next page. The display shows the settings made in the Section, "Changing display settings" (11 page). When an setting, press the [ENT] button to enter the adjust mode. When the illustration is shown, press the indicated button (the [ENT] button in this example). When [ adjusted value, press the [ ] or [ ] [DISP] button to switch the setting. When the [VOL] buttons are not used within 1 sec, the adjustment value display is switched. When [ ] is displayed to the left of the adjusted value, press the [ ] or [ ] [VOL] button to switch the adjustment value. The next item is displayed. 18 DVS9755z Control unit button operations Setting acoustic features (ADJUST MODE) *1 *2 *3 *4 *7 *5 *7 *6 DVS9755z 19 Control unit button operations Setting acoustic features (ADJUST MODE) Adjusting automatic sound format identification (FORMAT) This function automatically identifies the sound format of the inserted disc and plays back the disc accordingly. [. . . ] 2 · Cord clamps (large) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 · Cord holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 · Velcro tape (large A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 · Velcro tape (small B) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]