User manual CLARION DX425

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour and the condensation will disappear naturally to allow normal operation. [. . . ] Press and hold for more than 2 seconds: Stores current station into ISR memory (radio mode only). Switches among main display, sub display and clock display. When pressed and held for 2 seconds: Auto store. Scan play. ¢ DISP SCN PS/AS § RPT BLS ¶ RDM MONI Repeat play. Random play. * Some of the corresponding buttons on the source unit and remote control unit have different functions. DX425 9 8. OPERATION Note: · Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold). Basic Operations CAUTION When this unit is turned on, starting and stopping the engine of a car with its volume raised to the maximum level may harm your hearing. · B-BOOST : bass emphasized · IMPACT : treble emphasized · EXCITE : bass and treble emphasized · CUSTOM : bass and treble adjustment · Z+ OFF : no sound effect * The factory default setting is "CUSTOM". Adjusting the Bass This adjustment can be performed when the Zenhancer Plus is set to "CUSTOM". 1) Press A button % and select "BASS". 2) Turning Rotary knob $ clockwise emphasizes the bass; turning it counterclockwise attenuates the bass. * The factory default setting is "0". (Adjustment range: ­6 to +6) 3) When the adjustment is complete, press A button % several times until the function mode is reached. 10 DX425 Adjusting the Treble This adjustment can be performed when the Zenhancer Plus is set to "CUSTOM". 1) Press A button % and select "TREB". 2) Turning Rotary knob $ clockwise emphasizes the treble; turning it counterclockwise attenuates the treble. Switching the Clock Display Every time the DISP button 7 is pressed, the display will change between the operation mode and the clock display. Setting the Clock 1) Press the DISP button 7 to display the clock display. 2) Press and hold the DISP button 7 for 1 second or longer. 3) Press the SRCH Left button 2, then set the current hour. 4) Press the SRCH Right button 2, then set the current minute. 5) Press the DISP button 7, then the clock is set. * The factory default setting is "0". (Adjustment range: ­6 to +6) 3) When the adjustment is complete, press A button % several times until the function mode is reached. English Adjusting the Balance 1) Press A button % and select "BAL". 2) Turning the Rotary knob $ clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker. Notes: · If · * The factory default setting is "0". (Adjustment range: L13 to R13) 3) When the adjustment is complete, press A button % several times until the function mode is reached. you select another operation mode while you are setting the clock, the clock setting operation will be canceled. If you remove the vehicle's battery for a check or repair, the clock will be reset, so you must set it again. Adjusting the Fader 1) Press A button % and select "FAD". 2) Turning the Rotary knob $ clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. Turning the screen saver function on or off This unit is equipped with the function which enables you to display a variety of patterns and characters in the Operation status indication 2 in a random order. [. . . ] If the fuse blows again, consult your store of purchase. Eject the compact disc before loading the new one. Clean the compact disc with a soft cloth. Replace with a compact disc with no scratches. [. . . ]