User manual CLARION DXZ588R USB INSTALLATION GUIDE

[. . . ] Install the remove screw to the main unit (Figure 8). Store the removed stopper in a safe place together with the Instruction Manual. There are no user serviceable parts inside. [. . . ] Secure the unit in the dashboard, and then reassemble the dashboard and the center panel. Prepare all articles necessary for installing the main unit before starting installation. If you have to do any work on the car body, such as drilling holes, etc. Dashboard Mounting bracket (1 pair for the left and right sides) ( ) : The parts and screws with this mark are used to install radio or included in the installation kit (Note 3). : The screws with this mark are originally attached to the vehicle. note 1: · In some cases, the center panel may require some modification (trimming, filling, etc. If a hook on the installation bracket interferes with the unit, bend and flatten it with a nipper or a similar tool. note 3: · If reattaching screws which have been detached, remove any filings from the screws and screw mounting bracket. Before attaching the universal mounting bracket, slightly bend the spring toward the inside with your fingers and attach it to the side of car. Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 4. Take care of the top and bottom of the outer escutcheon and mount it so that all the hooks are locked. (Figure 5) Note: · Some car models require special mounting kits for proper installation. Fasten the front stopper securely to prevent the main unit from coming loose. Be sure to turn the power off when wiring. Be particularly careful where you route the cables. Keep them well away from the engine, exhaust pipe, etc. If it is, replace the fuse with a new one with the same amperage rating as the original one. Do not let the battery side touch other metal parts. [. . . ] So you can listen to your telephone calls or music from external devices on your car speaker. @ # $ % Description Main unit CeNET extension cable CD changer RCA extension cable (sold separately) 4-Channel power amplifier Front speakers Rear speakers 5. 1ch surround decoder control unit Optical connector cable Center speaker (with amplifier) Subwoofer (with amplifier) External unit Aux Bluetooth BB (BLT373) CeNET Bluethooth BB (BLT583) In certain VW and Opel/Vauxhall cars, the connector # is used as a speed-dependent volume control (GALA). [. . . ]