User manual CLARION DXZ666MP

[. . . ] DXZ666MP CD/MP3/WMA RECEIVER/CeNET CONTROL Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] When using Windows Media Player 9, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Personally constructed WMA files are used at your own responsibility. 2. Files without MP3/WMA data will not play. The indication "­ ­:­ ­" appears in the play time display if you attempt to play files without MP3/WMA data. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select "ISO9660 level 1, 2 or JOLIET or Romeo" as the writing software format. Normal play may not be possible if the disc is recorded on another format. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). Do not affix a name to a file inside a folder having the same name. A disc with a folder having more than 8 hierarchical levels will be impossible. Up to 255 files can be recognized per folder. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC. ) 3. Some noise may occur depending on the type of encoder software used while recording. Multisession function When a disc contains both normal CD type tracks and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play. Each time you press and hold the [BND] button for 1 second or longer, the mixed mode is switched between CD type or MP3/WMA type. The following indication appears in the title display when switching the track type to be played. Display when CD type track is selected: Precautions when creating MP3/ WMA disc Usable sampling rates and bit rates: 1. MP3: Sampling rate 11. 025 kHz-48 kHz, Bit rate: 8 kbps-320 kbps / VBR 2. WMA: Bit rate 48 kbps-192 kbps File extensions 1. Always add a file extension ". MP3" or ". WMA" to MP3 or WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. M-SESS CD Display when MP3/WMA M-SESS MP3 type track is selected: 1. Types of recording that can be played are as follows. 18 DXZ666MP CD/MP3/WMA Operations English Disc Setting Set to CD Set to MP3/WMA Mixed with CD and Play CD Play MP3/WMA MP3/WMA type tracks CD type track only Play CD Play CD MP3/WMA type track only Play MP3/WMA Play MP3/WMA 2. After making these settings, remove the disc and then reinsert it. When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard. [. . . ] Sound is bad directly after power is turned on. Wrong filename MP3/WMA files are not encoded properly. Water droplets may form on the internal lens when the car is parked in a humid place. File system is not correct. Let dry for about 1 hour with the power on. Use ISO9660 level 1, 2 or JOLIET or Romeo file system. 28 DXZ666MP 10. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. [. . . ]