User manual CLARION DXZ756MC

[. . . ] Owner's manual !" DXZ856MP CD/MP3/WMA Receiver / CeNET & Touch Panel Control · CD/MP3/WMA / CeNET !" # · CD/MP3/WMA / CeNET & Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this unit. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable. [. . . ] · The factory default setting is "OFF". Touch [M-BASS EX] to select "ON" or "OFF". Each time you touch [M-BASS EX], the adjustment item changes as following order: OFF ON OFF. . . Press the [SOUND] button to return to the original mode. M-BASS EX OFF BASS TREBLE BALANCE 0 FADER 0 RTN 24 DXZ856MP Sound Adjustment English Note: When "1", "2", "3", or "USER" is selected for ADF (Anti Distortion Filter), setting of MAGNA BASS EX cannot be performed. Adjusting the treble (Gain, Frequency) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY GAIN. . . Touch on the right of the display to adjust the setting. The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +6) The factory default setting for "FREQUENCY" is "12k". When the adjustment is complete, press the [SOUND] button to return to the original mode. Adjusting the sub-woofer · "SW VOLUME" (sub-woofer) can be adjusted only when the "SUB-WOOFER" is set to "ON" (cf. · The factory default setting for SW VOLUME is "0". Touch [SW VOLUME]. SW VOLUME 0 RTN 3. Touch on the right of the display and adjust the item as desired. This item can be adjusted within the range -5 to +5. 4. Press the [SOUND] button to return to the original mode. Adjusting balance/fader Adjusting the bass (Gain, Frequency, Q-curve) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY Q GAIN. . . Touch on the right of the display to adjust the setting. The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +8) The factory default setting for "FREQUENCY" is "50". (Adjustment 50/ 80/120Hz) The factory default setting for "Q" is "1". When the adjustment is complete, press the [SOUND] button to return to the original mode. BALANCE: Adjusts the volume balance between the left and right speakers. FADER: Adjusts the volume balance between the front and rear speakers. · The factory default setting for BALANCE is "0" and for FADER is "0". [. . . ] A DISC inside the CD changer is not loaded. A DISC inside the CD changer cannot be played due to scratches, etc. A DISC inside the CD changer cannot be played because it is loaded upside-down. A DISC inside the DVD changer cannot be played. [. . . ]