User manual CLARION DXZ865MP

[. . . ] Owner's manual Mode d'emploi Manual de instrucciones DXZ865MP CD/MP3/WMA Receiver / CeNET & Touch Panel Control Récepteur CD/MP3/WMA / CeNET et écran de contrôle tactile Receptor de CD/MP3/WMA / Control en panel táctil y CeNet Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this unit. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] Notes: · As the volume changes when ADF is switched, switch ADF with the volume and "SW VOLUME" (sub-woofer) turned down as far as possible. Touch [ADF]. SOUND 1 1 ADF OFF Setting MAGNA BASS EXTEND The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound. · The factory default setting is "OFF". Touch [M-BASS EX] to select "ON" or "OFF". Each time you touch [M-BASS EX], the adjustment item changes as following order: OFF ON OFF. . . Press the [SOUND] button to return to the original mode. M-BASS EX OFF BASS TREBLE BALANCE 0 FADER 0 RTN 24 DXZ865MP Sound Adjustment English Note: When "1", "2", "3", or "USER" is selected for ADF (Anti Distortion Filter), setting of MAGNA BASS EX cannot be performed. Adjusting the treble (Gain, Frequency) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY GAIN. . . The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +6) The factory default setting for "FREQUENCY" is "12k". When the adjustment is complete, press the [SOUND] button to return to the original mode. Adjusting the sub-woofer · "SW VOLUME" (sub-woofer) can be adjusted only when the "SUB-WOOFER" is set to "ON" (cf. · The factory default setting for SW VOLUME is "0". Touch [SW VOLUME]. SW VOLUME 0 RTN 3. Touch on the right of the display and adjust the item as desired. This item can be adjusted within the range -5 to +5. Press the [SOUND] button to return to the original mode. Adjusting balance/fader BALANCE: Adjusts the volume balance between the left and right speakers. FADER: Adjusts the volume balance between the front and rear speakers. · The factory default setting for BALANCE is "0" and for FADER is "0". Touch [BALANCE] or [FADER]. BALANCE Adjusting the bass (Gain, Frequency, Q-curve) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY Q GAIN. . . Touch on the right of the display to adjust the setting. [. . . ] A DISC inside the CD changer cannot be played due to scratches, etc. A DISC inside the CD changer cannot be played because it is loaded upside-down. A DISC inside the DVD changer cannot be played. A DISC cannot be played due to scratches, etc. [. . . ]