User manual CLARION DXZ868RMP

[. . . ] Owner's manual Mode d'emploi Bedienungsanleitung Istruzioni per l'uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções DXZ868RMP CD/MP3/WMA Receiver / CeNET & Touch Panel Control Récepteur CD/MP3/WMA / CeNET et écran de contrôle tactile CD/MP3/WMA-Receiver / CeNET & Touch Panel Bedienfeld Lettore CD/MP3/WMA / Comando pannello a tocco CeNET CD/MP3/WMA Ontvanger / CeNET & Aanraakbedieningspaneel Receptor de CD/MP3/WMA / Control en panel táctil y CeNet CD/MP3/WMA-mottagare / CeNET & Pekskärm CD/MP3/WMA Receiver / CeNET & Touch Panel Control Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this unit. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] Touch [SW VOLUME]. SW VOLUME 0 RTN 3. Touch on the right of the display and adjust the item as desired. This item can be adjusted within the range -5 to +5. Press the [SOUND] button to return to the original mode. Adjusting balance/fader BALANCE: Adjusts the volume balance between the left and right speakers. FADER: Adjusts the volume balance between the front and rear speakers. · The factory default setting for BALANCE is "0" and for FADER is "0". Touch [BALANCE] or [FADER]. BALANCE Adjusting the bass (Gain, Frequency, Q-curve) This adjustment can only be performed when the ADF (Anti Distortion Filter) is set to "OFF". Touch on the left of the display to select the item. Each touch of switches the adjustment items as follows: GAIN FREQUENCY Q GAIN. . . Touch on the right of the display to adjust the setting. The factory default setting for "GAIN" is "0". (Adjustment range: -6 to +8) The factory default setting for "FREQUENCY" is "50". (Adjustment 50/ 80/120Hz) The factory default setting for "Q" is "1". When the adjustment is complete, press the [SOUND] button to return to the original mode. 0 RTN 3. Touch on the right of the display and adjust the item as desired. "BALANCE" can be adjusted within the range L13 (left side emphasized) and R13 (right side emphasized). "FADER" can be adjusted within the range R12 (rear side emphasized) and F12 (front side emphasized). Press the [SOUND] button to return to the original mode. 30 DXZ868RMP Sound Adjustment English Adjusting the filter frequency Filter frequency You can set a filter frequency value best suited for your speakers. * This item can be adjusted only when "SUBWOOFER" is set to "ON". · The factory default setting for FILTER is "THROUGH". Filter adjustment SUB-W LPF (Subwoofer Low-Pass Filter) adjustment This filter cuts the signals above the selected frequency value. Each touch switches the frequency value as follows: THROUGH 50Hz 80Hz 120Hz THROUGH. . . Select the frequency that suits your subwoofer. [. . . ] A DISC cannot be played due to scratches, etc. A DISC is loaded upside-down inside the CD deck and does not play. A DISC inside the CD changer is not loaded. A DISC inside the CD changer cannot be played due to scratches, etc. [. . . ]