User manual CLARION EA1276

[. . . ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 11. IDENTIFICATION OF PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 iPod is for legal or rightholder-authorized copying only. iPod is a trademark of Apple Inc. , registered in the U. S. INTRODUCTION The Clarion EA1276, CeNET iPod interface adapter, simulates the iPod features and functionality to a compatible main unit. [. . . ] INSTALLATION There are no moving parts in EA1276. However, caution must be taken to ensure minimum damage to the unit. Do not press, puncture or drop the unit at anytime. Install the unit where there is no direct sunlight, away from vents or high moisture areas and away from other vehicle electronic components. Mount EA1276 away from moving parts in the vehicle. English Using Velcro or Double-Sided Tape Stick velcro or Doble-sided tape to the EA1276. Note: In case of using velcro or double-sided tape, make sure the unit will not fall down as this might damage the electronic component inside. Using Screws There are screw mounting holes in EA1276. Before drilling, make sure there are no hidden wires and parts that might be damaged. (M4x14) Improper wiring might damage EA1276, main unit and iPod. !iPod CONNECTION To start iPod operations, change the main unit mode to iPod mode. Playback will start automatically from the last position of the iPod. The display changes from: CONNECT g Start Playing It will display current track and total tracks available in the current category. If the iPod is not connected, the main unit will display "No iPod". The main unit is unable to detect the presence of iPod if the battery of the iPod is dead. English After connecting your iPod to the EA1276, the iPod display will change to the following: Disconnecting The iPod automatically switches "on" after connecting to EA1276, and its battery is charged as long as it stays connected with the vehicle ignition key turned to ACC or ON. To switch off the iPod manually, disconnect from EA1276 adaptor. If vehicle ignition is turned to ACC off, playback is paused, and iPod will go to power off within a few minutes. 6. MAIN FEATURES Playback The iPod buttons are disabled and the display is locked while it is connected to EA1276. All operations of the iPod are controlled from the main unit. Some iPod operations and features will be unavailable. Please read this manual to understand your supported iPod features. For playback operations, please refer to the main unit operations. While the iPod is connected, the main unit will display current track number and total tracks in current category by default. Playback position and setting Playback position and setting will remain the same as long as the iPod stays connected to EA1276. If the iPod is disconnected, playback position will remain the same position before disconnection. Default playback setting By default, the playback setting will be: · Start to play from the last position of track before iPod is being connected. · Shuffle (Random) On/Off will follow iPod setting · All Repeat On 6 Supported Operation · iPod Menu mode · Category Direct · Play/Pause · Song (Track) Up/Down · ALBUMS · SONGS · GENRES · COMPOSER Each category will have its own submenu. Please refer to iPod owner's manual for each category description and structure. English Here are the operations supported by EA1276 and controlled through the main unit. · Fast Forward or Fast Backward functions · All Song Play mode · Repeat function · Random function · Playback position and setting Category Direct Categories can be selected directly with the corresponding button during iPod Menu mode as shown in the table below. [. . . ] iPod with video (It does not apply to picture/video display) Note: Please update your iPod to the latest software version. 8. CHANGING SOURCES FROM iPod MODE If the main unit source button is continuously pressed, the main unit will change from iPod mode to other modes (depending on connections and system installed). iPod setting and play position is kept as long as iPod is still connected during this period. 9. ERROR CODES Error Display Reason Communication error. [. . . ]