User manual CLARION HX-D1

[. . . ] Owner's manual HX-D1 AM/FM CD PLAYER WITH CD/MD CHANGER CONTROL Thank you for purchasing the Clarion product. Please read this owner's manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] Setting this system to the incorrect position results in noise. Manual memory 1. Select the desired station with seek tuning, manual tuning or preset tuning. Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory. 1. Press the [BAND] button to receive an FM broadcast. Press the [DIRECT] button 5 while holding the [BAND] button. After having shown the indication "FM DIVER" in the display, switch the FM diversity system to show the indication "ON" or "OFF" in the display. Auto store Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position. Press [BAND] button and select the desired band (FM or AM). Press and hold [SCN] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels. HX-D1 11 CD Operations Loading a CD Insert a CD into the centre of the insertion slot with the label side facing up. The CD plays automatically after loading. Notes: · Never insert foreign objects into the CD insertion slot. · If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. · Discs not bearing the mark or and CD-ROMs cannot be played by this unit. · Some CDs recorded in CD-R mode may not be usable. Even when recorded in CD-RW mode, some CDs not be usable. Loading 8 cm compact discs No adapter is required to play an 8 cm CD. Insert the 8 cm CD into the centre of the insertion slot. Top function The top function resets the CD player to the first track of the disc. Press [BAND] button to play the first track (track No. 1) on the disc. Scan play The scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is cancelled. The scan play is useful when you want to select a desired track. 1. Press the [SCN] button to start scan play. [. . . ] Measure This is a failure of CD deck's mechanism and consult your store of purchase. Replace with a non-scratched, non-warped-disc. This is a failure of CD changer's mechanism and consult your store of purchase. Replace with a non-scratched, non-warped disc. [. . . ]