User manual CLARION JOYRIDE

[. . . ] Cautions PRECAUTIONS Please carefully read and follow these Safety Warnings and Precautions before using the JoyrideTM System. SAFETY WARNINGS · Only look at the screen when it is safe to do so and for a very short period of time. If you need to study the screen or look at the screen for a prolonged period of time, pull over and stop the car so that you can safely evaluate the information without risking danger to yourself or to others. · Because operating certain parts of this system while driving can distract your attention away from the road and possibly cause an accident or other serious consequences, carry out the set up procedures and learn the basics of the system before attempting to use it on the road. [. . . ] To seek a radio station-- Using speech commands-- · Say "AutoPC. " Wait for the green "Listening" bar to appear; then speak the next command. · Say "Next"--OR--"Previous" to seek up or down. From Radio main screen, press to locate the next available station frequency that is down from the current position. --OR-- Press to locate the next available station frequency that is up from the current position. As necessary, press to manually tune a frequency. 88 Using Radio Using the remote controller-- 1. Using the joystick, press to start seeking an available frequency. 2. Move the joystick in the opposite direction to stop seeking. Press and hold the joystick, then wait 5 seconds, to scan to the next available station. To scan a radio station-- 1. Press and hold or for 2 seconds and the scan function will start. Note SCAN is displayed on the right side of the display. Press the opposite side arrow to cancel the SCAN function. 89 User's Manual Advancing to a Station Stored in a Preset Location Important To move to a station stored in a preset location-- Using speech commands-- · Say "AutoPC. " Wait for the green "Listening" bar to appear; then speak the next command. · Say "Preset" · Say "1" (or any number between 0 and 9 that represents an actual preset). When using speech commands, be sure to pause between "Preset" and "Number. " To learn how to set up station presets, see Editing Station Presets in this chapter. From Radio main screen, press the "1" key briefly to go to Preset 1. Press other numbers to go to other stations stored under Presets. Using the remote controller-- Use the internal keypad to press a number that corresponds to the stored frequency. 90 Using Radio Selecting a Station Using a Custom Speech Command To jump to a station preset using a custom speech command-- · Say "AutoPC. " Wait for the green "Listening" bar to appear; then speak the next command. · Say "Preset. " · Say the custom name assigned (e. g. , "Jazz"). Custom speech commands only work if you are on the band in which the command was recorded. To learn how to record custom speech commands, see Recording a Station Name. Adjusting Audio Settings Radio uses the same Audio Settings offered in the Audio program. To adjust audio settings-- See Chapter 6, Using the Audio Program for instructions about adjusting individual bass, treble, fade, balance and other audio settings. 91 User's Manual Storing a Station in a Preset Location The Radio program allows you to store your favorite stations in preset locations that can be accessed quickly using the keypad or the "Preset" speech command. To store a station in a preset location-- 1. Press to locate the frequency you want to store. 2. [. . . ] How do I control the DVD Player options on a large screen?xxv xxvii xxviii xxix xxx xxxv xxxvii xxxix 1 1 5 13 17 19 20 21 22 24 26 28 193 User's Manual How do I adjust the headphone output?Using the CD Player / CD Changer How do I start the CD Player?How do I directly select a song on a CD? [. . . ]