User manual CLARION MAX667VD

[. . . ] Owner's manual & Installation manual DVD MULTIMEDIA STATION WITH TOUCH PANEL CONTROL Thank you for purchasing the Clarion MAX667VD. * * * * * This owner's manual is for the MAX667VD. Please read this manual thoroughly before operating this equipment. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. [. . . ] Subtitles are turned off. MAX667VD 39 DVD Video Player Operations English Owner's manual Switching angles On DVD discs in which video images have been recorded in two or more angles, you can switch among the angles during playback. This operation can be performed when the "Setting up the angle mark display" function (see page 32) is set to "ON". Touch the [ ] (Angle) key during playback. Each time you touch the key, you can switch among angles. · Depending on the disc, up to 9 angles may be recorded. For details, see the mark of the disc ( : Indicates multi-angle). · Depending on the disc, angles may switch smoothly or switch with a momentary still image. · When the power is turned on and when the disc is changed to a new one, the language set at the time of factory shipment is selected. If that language has not been recorded, the language specified on the disc. · Depending on the disc, switching may be completely impossible or impossible on some scenes. · It may take time to switch among angles. · Depending on the disc, scenes recorded in two or more angles may be played back. Watching a video CD After disc loading, the play mode is automatically engaged. · Button operation may differ depending on the story of the disc. After the menu screen is displayed For Video CD discs equipped with the PBC (Play Back Control) function, the menu screen appears. After the menu screen is displayed, select an item in the following operations and play it back. Note: · There are two types of Video CDs, and these differ in some operations and functions. For the operations and functions of a Video CD, see the documents attached to the Video CD. Showing the V-CD menu (for Video CD discs with PBC) * This key does not function on some discs. 1. Touch the screen to display the VIDEO CD mode screen, then touch the [Menu] key during playback. The displayed contents may differ, depending on the Video CD software. · Example showing menu display Displaying the playback status 1. Showing the DVD PLAYER mode screen, touch the [Option] key. Touch the [Back] key to return to the previous screen. Playback status is displayed on the screen. Title number Chapter number Playback time Title001 Chapter001 00:0019 2. [. . . ] Keep them well away from the engine, and exhaust pipe, etc. If the fuse should blow, check to see if the wiring is correct. If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). To replace the fuse, remove the old fuse of the power supply lead and insert the new one. [. . . ]