User manual CLARION NAX983HD

[. . . ] Owner's manual Mode d'emploi Benutzerhandbuch Manuale dell'utente Gebruikershandleiding Gua de usuario garhandbok Manual do utilizador Brugervejledning NAX983HD HDD NAVIGATION SYSTEM SYSTEME DE NAVIGATION HDD HDD-NAVIGATIONSSYSTEM SISTEMA DI NAVIGAZIONE HDD HDD-NAVIGATIESYSTEEM SISTEMA DE NAVEGACIN HDD NAVIGATIONSSYSTEM MED HRDDISK SISTEMA DE NAVEGAO COM HDD (UNIDADE DE DISCO RGIDO) HDD-NAVIGATIONSSYSTEM 1. Preface Safety Precautions When using this navigation system, follow the precautions listed below. After reading this manual, be sure to keep it in a handy place (such as the glove box of your car). English Warnings This navigation system should not be used as a substitute for your own judgment. Any route suggestions made by this navigation system may never override any local traffic regulations, your own judgment, and/or knowledge of safe driving practices. [. . . ] [Store To Favourite] Registers the Home Location to the Favourite List. [OK] Terminates the editing, then returns to the previous screen. [] Adjust the location by scrolling the map. 50 NAX983HD Registering/Editing the Data English To edit a Stored Location 1. Touch the name of the Stored Location you wish to edit. By touching the [Sort] key, you can change the listing order of the Address Book list. Edit data by a similar way as for registering data. "To register Locations" Step 3 (P. 50) Stored Tracking By touching the [Stored Tracking], you can register/edit the Stored Tracking, or change settings for show/hide of the Stored Tracking. The operation procedures are the same as for the Tracking Display Settings of the Navigation settings. "Tracking Display Settings" (P. 47) Avoid Area By touching the [Avoid Area] key, you can set an Avoid Area. The operation procedures are the same as for the Avoid Area Settings of the Navigation settings. 47) Stored Route Registers the current route. You can register up to 5 routes, and can also edit the registered routes. To register the current route Note: To register the current route, at least one way point is required. Deleting registered data You can delete various data stored in the navigation system. [Home Location] [All Stored Locations] [All Stored Routes] [Current Tracking] [All Stored Trackings] [All Avoid Areas] [All Previous Destinations] [Previous Starting Point] [All Favourite items] [All Frequent items] 3. From the displayed confirmation screen, touch the [YES] key. 1. On the displayed confirmation screen, touch the [YES] key. To edit the Stored Route 1. Touch the name of the Stored Route you wish to edit. [Rename] Changes the name of the Stored Route. [Replace] Replaces the Stored Route with the current route. [OK] Terminates the editing, then returns to the previous screen. Touch the [OK] key. NAX983HD 51 Clock Settings When you touch the [Clock] key from the Setting menu, you can set the clock display. [. . . ] NAVTEQ toimittaa kriteerit kyttjlle pyynnst. Jos tietokanta ei toimi tmn rajoitetun vastuun edellyttmll tavalla, NAVTEQ pyrkii mahdollisuuksien mukaan korjaamaan tai vaihtamaan tietokannan puutteellisesti toimivan kopion. Jos nm toimet eivt johda siihen, ett tietokanta toimisi esitetyn takuun mukaisesti, kyttj voi valintansa mukaan joko saada kohtuullisen korvauksen maksamastaan hankintahinnasta tai purkaa tmn sopimuksen. NAVTEQin vastuuvelvollisuus rajoittuu thn eik nimenomaisesti annettua takuuta lukuun ottamatta NAVTEQ ei anna mitn takuita tietokannan tai sen avulla saatavien tulosten virheettmyydest, tarkkuudesta, luotettavuudesta tai muista ominaisuuksista. [. . . ]