User manual CLARION SR6000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CLARION SR6000. We hope that this CLARION SR6000 user guide will be useful to you.

Lastmanuals help download the user guide CLARION SR6000.


Mode d'emploi CLARION SR6000
Download

You may also download the following manuals related to this product:

   CLARION SR6000 INSTALLATION GUIDE (1423 ko)

Manual abstract: user guide CLARION SR6000

Detailed instructions for use are in the User's Guide.

[. . . ] Model SR6000 O Owner's Guide limited lifetime consumer warranty This Ungo Pro Security system is warranted against defects in material and workmanship. The main unit is covered by this limited lifetime warranty. This Limited Lifetime Warranty applies to Ungo Pro Security systems that have been installed by an authorized Ungo Pro Security dealer. This warranty is to the Original Purchaser ("Owner") and to the original vehicle in which it was installed into. [. . . ] Just press for two seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press the remote again. note: Once panic mode has been entered, the siren will sound for the programmed duration. on The LCD 2-way remote will beep (or vibrate) continuously when the system enters panic mode. The 2-way remote will not generate a page notification when panic mode is exited. © 2005 directed electronics, inc. 29 valet® mode You can prevent your security system from automatically arming and triggering by using Valet® Mode. This is very useful when washing the vehicle or having it serviced. In Valet® Mode, the security system will not arm, even with the remote, but all convenience functions (door locks, trunk release, etc. ) will continue to work normally. To enter or exit Valet® Mode: 1. Press and release the Valet® button within 10 seconds. The status LED will light solidly if you are entering Valet® Mode, and it will go out if you are exiting Valet® Mode. To enter or exit Valet® Mode using the remote: DRW-35 Steps 2 through 3 must be quickly and smoothly completed. again. The status LED will light solidly if you are entering Valet® Mode, and it will go out if you are exiting Valet® Mode. 30 © 2005 directed electronics, inc. remote start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle. important!(1) Never remote start your vehicle when the keys are in the ignition, except when performing Valet® Take-Over, and (2) Never start the vehicle if it is not in either PARK or NEUTRAL. To remote start the vehicle: 1. Press on the remote twice within 3 seconds. 2. The parking lights will flash to confirm that the vehicle will attempt to start. A remote start page notification with a unique melody (or vibration) will be generated and the LCD will display the remote start (19) icon as long as the vehicle is running. note: The 2-way remote will generate a Page Notification with a different unique two-tone beep (or vibrate) and the remote start (19) icon will turn off when the remote start shuts down. 4. In gasoline vehicles, the engine will start 4 seconds after the parking lights flash. In diesel vehicles, the engine will start when the WAIT-TO-START indicator on the vehicle's dash goes out. © 2005 directed electronics, inc. 31 5. Once the vehicle has started, it will run for the pre-programmed period of time (either 12, 24, or 60 minutes - see Programming Options section of this guide) or until a shutdown input is triggered. important!It is unsafe to operate a vehicle's motor in a garage or other closed off area. Breathing the exhaust from the vehicle is hazardous to your health. Never activate the remote start in an enclosed space. When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not START) position. [. . . ] Although the on-board relay can control most power trunk releases, sometimes an optional relay is required. If the factory release is not power-activated, Directed®'s 522T trunk release solenoid can often be added. Power Window Control: Automatic power window control is pro- vided with the 529T and 530T systems. These can operate power windows, and can roll them up automatically when the system is armed, roll them down, or both up and down. © 2005 directed electronics, inc. 49 glossary of terms Control Unit: The "brain" of your system. Usually hidden under- neath the dash area of the vehicle. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE CLARION SR6000

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CLARION SR6000 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag