User manual CLARION VMA1891

[. . . ] . 6 WIRING PRECAUTIONS (+12V OPERATION) . . 8 SPECIFICATIONS & TROUBLESHOOTING . . 9 Introduction 1 PRECAUTIONS: · This set can be use in 12V, negative ground vehicles or home applications. Be sure to consult your Clarion Dealer before installing it in 24V vehicles. [. . . ] Use UP/DN buttons to select the adjustment Sub Menu. Use the UP/DN buttons to increase or decrease the level. Press the OSD display button to save and exit to the Main Menu. Brightness None None OSD Operation Contrast Ratio of black to white intensity. Intensity of Red color Intensity of Green color Intensity of Blue color Color 1) Red 2) Green 3) Blue Position & Quality 1) H-Position 2) V-Position 3) Frequency 4) Phase Recall Use UP/DN buttons to select the adjustment Sub Menu. Use the UP/DN buttons to increase or decrease the level. Press the OSD display button to save and exit to the Main Menu. 1)Factory setting Recalls the factory settings Use UP/DN buttons to select the adjustment Yes/No Sub Menu. Use 2) 9300° K Chromaticity coordinate the UP/DN buttons to select choice. Press the 3) 6300° K according to CIE 1931. Select Exit, then 4) Exit Exits Function press the OSD button to exit the Main Menu. Horizontal screen position Vertical screen position Vertical flicker Horizontal flicker 4 OWNER'S MANUAL OSD FUNCTIONS Icons AND OPERATIONS: Function Auto Sets all functions Auto Screen Position Auto Phase settings Exits and Auto Saves Sub Menus 1) All 2) Auto Position 3) Auto Phase 4) Exit Operation Use UP/DN buttons to select the appropriate Sub Menu. Press the OSD display button to activate the automatic function. Select Exit, then press the OSD button to exit the function Use UP/DN buttons to select the appropriate Sub Menu. Press the OSD display button to enter the input type. If no signal is present, an error message will appear. Use UP/DN buttons to select any adjustment Sub Menu. Press the OSD display button to save choice. Use UP/DN buttons to scroll to Exit in Main Menu. Press OSD button to exit Auto Adjust Input Source Display Size Language 1) RGB Input for PC 2) Video (RCA) Input for Composite Video 3) S-Video Input for High quality video (such as DVD) 1) Normal 2) Expand 3) Full 1) English 2) German 3) French 4) Italian 5) Spanish 1) OSD Timeout 2) OSD Position 3) OSD Color 4) Exit Normal 4/3 Mode Widescreen mode 16/9 Fills the height and width of the screen Changes the OSD menu to Use the UP/DN buttons to select the the user's preferred appropriate language. button again to save the language and exit to the Main Menu. Position Blue, Green, Cyan, Magenta, None Exits and Auto Saves Use UP/DN buttons to select the appropriate Sub Menu. Press the OSD display button to enter the Sub Menu. Use the UP/DN button to scroll through the adjustment choices. [. . . ] NOTE: This monitor's audio section can only be power through the 110 Vac connection. When using the monitor in a +12Vdc application, additional audio components are required. See your Clarion Dealer for additional equipment. 12VDC APPLICATIONS: 7 12V Application VMA1891 18. 1" TFT LCD Color Monitor 12VDC APPLICATIONS: (CONT) 12V Application 8 ABOUT INSTALLATION: Installation of mobile audio and video components requires experience with a variety of mechanical and electrical procedures. [. . . ]