User manual CLARION VRX918R

[. . . ] PACKAGE CONTENTS 1 Main unit 2 Tuner Amp unit 3 Manuals Owner’s manual & Installation manual Warranty card 4 Power supply lead (For the tuner amp unit) 5 Connection cord (Main unit ↔ Tuner amp unit) 6 Antenna extension cord 7 Bag for accessories of the main unit (No. 1) Flat head screw (M5 × 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Sems hexagonal bolt (M5× 8) . . . . . . . . . . . . . . . . . . . . . 5 Electro tap Machine screw (M4× 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the enclosed screws for installation. (Figure 4) Chassis Chassis Damage Max. The source unit has mounting screw holes for NISSAN (N marks) and TOYOTA (T marks) vehicles. T N T Shift lever (check that it does not touch the LCD. ) Shift lever Figure 2 3. Install the unit within 30° of the horizontal plane. (Figure 3) N T N Figure 5 Max. If you have to do any work on the car body, such as drilling holes, consult your car dealer beforehand. 54 VRX918R 5. INSTALLING THE MAIN UNIT s Universal Mount 1. Place the universal mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the universal mounting bracket inward, then secure the stopper as shown in Figure 6. Insert the main unit into the universal mounting bracket until it locks. Mount the outer escutcheon so that all the hooks are locked. English Installation and Wire connection manual Notes: 1) Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. Do not let the battery side touch other metal parts. Fuse holder Figure 11 VRX918R 57 8. WIRE CONNECTION 2 Securely connect to the metal part of the car with a screw, etc. Black Choke coil 3A English Installation and Wire connection manual Earth (ground) cord Yellow Main power supply cord Fuse CeNET cable (provided with this unit) CeNET cable (Sold separately) Subwoofer output terminal L+R (RCA) Power supply lead Front audio output (input) terminal L+R (RCA) ∗6 5 Rear audio output (input) terminal L+R (RCA) ∗6 Reset switch DSP select switch (∗5) Tuner amp unit ∗1 Top view of the tuner amp unit 4 ∗4 1 ∗9 3 ∗8 VISUAL input (RCA)/TV TUNER input (RCA) DVD input (RCA) VISUAL audio input terminal L+R (RCA) VIDEO output (RCA) ∗7 58 VRX918R English B-2 B-1 B-3 B-4 B-5 B-6 9 B-7 B-8 A-7 A-8 Installation and Wire connection manual ∗1 7 ∗3 A-4 A-6 A-5 No. 0 ∗2 ∗2 8 6 B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 A-4 A-5 A-6 A-7 A-8 1 2 3 4 5 6 7 8 9 0 Description REAR RIGHTB REAR RIGHTv FRONT RIGHTB FRONT RIGHTv FRONT LEFTB FRONT LEFTv REAR LEFTB REAR LEFTv +12 V MAIN POWER (∗2) AUTO ANTENNA (∗1) ILLUMINATION +12 V ACCESSORY (∗2) GROUND NAVI terminal RGB INPUT CCD/VISUAL 2 terminal Radio antenna jack (∗4) CeNET terminal Spare terminal (Black) Phone mute (Brown) (∗3) Spare terminal (Yellow) ISO CONNECTOR Parking brake (Bright Green) ∗1: When the unit is installed in a 1998 or later Volkswagen model, make sure to interrupt the <<Remote>> output. Disconnect the <<blue/white>> wire and insulate the front ends of this lead. A breakdown may occur if the lead is not disconnected, or front ends are not insulated. ∗2: In certain vehicles - Volkswagen/Opel/Vauxhall - it is necessary to exchange the accessory <<Red>> and the main power <<Yellow>> connection, to avoid overload and loss of memory. ∗3: Connecting the PHONE MUTE Terminal The lead included with the unit must be connected to the specified position of the vehicle’s ISO connector in order to use the “triggered audio mute for cellular telephones” function. ∗4: Use the attached extension lead when necessary. (Provided with this unit) Note : Before making any installation, disconnect the car battery - (negative) cable. ∗5: When connecting a DSP (sold separately), set the normal DSP select switch to “D”. Then, the AUDIO OUT (IN) terminal of the Tuner Amp Unit is only available for audio input, not outputting D the audio. [. . . ] For detailed information, refer to the instruction manual of the TV TUNER. s Connecting the parking brake lead Connect the lead to parking brake lamp earth in the meter panel. Notes: • Connecting the parking brake lead to lamp earth allows you to watch TV/VTR/DVD VIDEO when the parking brake is engaged. • When the parking brake lead is not connected, the monitor will stay off. Parking brake lamp + lead to battery - cord parking brake signal lead Connect these three leads. Parking brake lead (bright green) Parking brake 60 VRX918R 9. SAMPLE SYSTEMS s Sample System 1 GPS ANT. RGB English Installation and Wire connection manual MAIN UNIT VRX918R (S-TV) NAX9500E COMPOSITE (RCA) COMPOSITE (RCA) ∗ AMP built-in MINI DIN (8P) ∗ When a video composite source is used, connect it to the 8pin Mini-DIN video jack. [. . . ]