User manual CLARION VXZ646

[. . . ] Owner's manual VXZ646 AM/FM DVD/VCD/CD/MP3 PLAYER · · Thank you for purchasing this Clarion product. Please read this owner's manual in its entirety before operating this unit. After reading this manual, be sure to keep it in a handy place (e. g. , glove compartment). This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable. [. . . ] When the PBC is turned on or off, the disc plays from the beginning. The factory default setting of PBC is "ON". Playback control (PBC) This control signal is recorded on a Video CD for version 2. 0 and used to control playback. Using pre-recorded menu screens in the Video CD with PBC, you can enjoy playback of software with a simplified dialog function or software with search function. You can also enjoy a still picture at high or standard resolution. · Even when display of the playback status is OFF, you can display the playback status by operating the button. · Depending on the playback status or disc, the following indication may appear. By pressing the button for 1 second or longer, you can switch among time displays. When the PBC is turned on The beginning of a disc is played if one of the operations such as "SET UP", "STOP" or "ACC ON/OFF" is performed. TRACK ELAPSED TRACK REMAIN Note: · Depending on some discs, the [P. TIME] indication may not be displayed on some scenes. Also, it may occur that the P. TIME operation does not work. When this happens, the indication "INVALID" will appear. 24 VXZ646 Listening to a CD English This unit is a CD TEXT compatible model. This unit supports the display of the DISC TITLE, TRACK TITLE and ARTIST of the CD TEXT. Note: · This unit supports only CD TEXT in English. Also, some character data may not be reproduced properly on the monitor. Fast forward and Fast rewind Press and hold the Fast forward [d] button or Fast rewind [a] button during playback. Press and hold the button, and the playback speed becomes 4-time faster first and then 8-time faster 3 seconds later. Release the button, and the normal speed is restored. After inserting a disc, the play mode is automatically engaged. · Example showing CD TEXT display. Searching with a track number This operation allows searching using the track numbers recorded on the CDs. This function can only be used from the remote control unit. Press the [SEARCH MODE] button during playback. Input the number of the track that you want to play back with the ten-key buttons (0 to 9). · To input the track number "12", press "1" of the ten-key buttons and then "2". Stopping playback Press and hold the [ ] button for 1 second or longer during playback. To resume playback · Press the [ ] button, and playback resumes from the scene where playback is stopped. Press "2". Pausing playback Press the [ ] button during playback. To resume playback · Press the [ ] button again, and playback resumes. 3. [. . . ] Replace with a non-scratched, non-warped-disc. DVD (CD/MP3) CD changer DVD changer If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase. 46 General English ERROR 3 1. A DVD/CD cannot be played due to scratches, etc. A DVD/CD cannot be played due to the defective pick-up part. [. . . ]