User manual CLARION VZ709

[. . . ] Owner's manual & Installation manual Mode d'emploi et manuel d'installation Manual de instrucciones y de instalación VZ709 DVD MULTIMEDIA STATION WITH 7-inch TOUCH PANEL CONTROL STATION MULTIMEDIA DVD AVEC COMMANDE PAR ECRAN TACTILE 7 pouces EQUIPO DVD MULTIMEDIA CON PANEL DE CONTROL TÁCTIL DE 7 pulgadas CLARION PRODUCT REGISTRATION INFORMATION For USA and Canada only www. clarion. com Dear Customer: Congratulations on your purchase of a Clarion mobile electronic product. We are confident that you'll enjoy your Clarion experience. There are many benefits to registering your product. We invite you to visit our website at www. clarion. com to register your Clarion product. [. . . ] Touch the [Back] key. Note: · This setting is disabled when a Mixed Mode CD, which contains both data track and audio tracks, is set in the DVD player. VZ709 41 6. SOURCE OPERATIONS (ACCESSORIES) XM Satellite Radio Operations This function is available when an XM tuner is connected. This unit can control the following satellite radio receiver: · XM Mini-Tuner Note: · Be sure to turn off the ACC power before connecting/disconnecting the XM tuner. English Owner's manual Selecting the XM mode 1. Press the [SRC] button, and touch the [XM] key. The system changes to the XM mode. Selecting a band 1. This changes the reception band as follows: XM1 XM2 XM3 XM1 . . . Confirming your Radio ID 1. Touch the [Options] key to display the Options screen. Touch the [Direct] key to display the Key Pad screen. Touch the [0] key, then touch the [ENT] key. Receiving the Channel "0" will display your Radio ID (8-digits number). Note: · If the [XM] key is not displayed or the message "CHECK XM TUNER" is displayed, check the connection with the XM Satellite Radio Receiver. · The audio output is muted and other button operations are not accepted during channel selection. Switching the operation mode Usually, the system will operate in the Channel selection mode. You can switch this to the Category selection mode by the following operation. Touch the [CAT] key to switch to the Category selection mode. If you do not perform operation for 15 seconds, the system will automatically return to the Channel selection mode. · Touch the [Back] key to switch to the Channel selection mode within 15 seconds. Information displayed during reception The following information is displayed when the satellite radio cannot be received normally. · When a channel is being tuned in (no signal is yet received): "LOADING" · A channel without a broadcast has been selected: "CH UNAVAILABLE" · A channel not covered by your contract: "CH UNAUTHORIZED" · When a channel is out of air time: "OFF AIR" · When no signal is received: "NO SIGNAL" · When the XM antenna is not connected correctly : "CHECK ANTENNA" 42 VZ709 XM Satellite Radio Operations English Tuning in a station Only channels that can be received are selected. Channels without broadcasts and channels not covered by the contract will be skipped. · This operation works only in the Channel selection mode. The system displays the information on the previous or next available channel. Touch the [ ] (Enter) key within 5 seconds. The system will tune to the channel that the information is displayed. Note: · If you do not touch the [ ] (Enter) key within 5 seconds, the system will return to the previous display. · When the Direct function is set to "ON" from the Options screen, touching the [ ] (Enter) key is not required. [. . . ] If a fuse is blown, replace it with a new one of the same amperage rating as the original (15A FUSE). To replace the fuse, remove the old fuse of the power supply cord and insert the new one. (Figure10) Note: · There are various types of fuse holder. Do not let the battery side touch other metal parts. caution CAUTION After the connection, fix the cord by a clamp or insulation tape for protection. [. . . ]