User manual CLARION XA311

[. . . ] Remarque: Veuillez déployer cette page et vous référer aux schémas quand vous lisez chaque chapitre. Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas. 3. Tape slack can lead to operating difficulties. Remove tape slack before inserting a cassette, particularly when using C-90 or prerecorded cassettes. [. . . ] Press A-M button 4 and select "FAD". Turning the Rotary knob 3 clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers. Tape Operation Loading Tapes Insert the cassette tape into the Cassette insertion slot with the side on which the tape is exposed facing the right. Playback starts automatically. * When * The factory default setting is "0". (Adjustment range: F9 to R9) the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically. English 3. When the adjustment is complete, press A-M button 4 several times until the function mode is reached. Note: · Fully insert the cassette tape into the cassette insertion slot. Switching the Display While pressing the BAND button 6, press the DISP button $ to enter the clock display mode. Main display § Clock display § Main display Listening to a tape which is already loaded Press the FUNC button 5 to select the tape mode. Playback begins automatically. Ejecting Cassette Tapes Press the Eject button 9. The cassette tape is ejected. Setting the Clock 1) While pressing the BAND button 6, press the DISP button $ to enter the clock display mode. 2) While pressing the BAND button 6, press and hold the DISP button $ for 2 seconds or more. This enables the clock editing mode. * The radio mode is selected automatically 4 seconds after ejecting the tape. Fast-Forwarding and Rewinding Use the FF button @ and REW buttons 0. : Press this to rewind the tape. * The editable fields will be indicated when the display flashes. 3) To move between the hour and minute fields, use the Up (hour) and Down (minute) buttons 1. 4) To store the clock setting, press the BAND button 6. * It is possible to listen to the radio during fast-forward, rewind or search operations. Switching to the Other Side of the Tape Press the PROG button !both the FF button @ and REW button 0 together at the same time. Playback is switched automatically to the other side of the cassette tape. Notes: · If you select another operation mode before complet· ing the above procedure, the clock setting operation will be canceled. Removing the vehicle's battery for a check or repair will cause the clock to reset to 1:00. Set the clock again if this happens. XA311 7 Radio Operation FM Reception For enhanced FM performance the ® tuner includes signal actuated stereo control and Multipath noise reduction circuits. Presetting Stations A total of 25 stations can be preset, 5 each for the FM1, FM2, FM3, FM4 and AM bands. Note: · When a station is preset, the station previously stored Listening to the Radio 1) Press the FUNC button 5 to select the radio mode. 2) To tune to a desired preset station, first press the BAND button 6 and select FM1, FM2, FM3, FM4 or AM. The band changes as follows each time the BAND button is pressed: FM1 § FM2 § FM3 § FM4 § AM § FM1 3) Use the corresponding Preset buttons * to select the desired station. in the memory at that position is cleared. Seek Tuning 1) Press the BAND button 6 and select the desired band. 2) Press the Up or Down buttons 1 to seek up or down the frequency band. Seek tuning automatically stops when a station is found. Presetting stations manually 1) Press the BAND button 6 to select the band at which to store the station. 2) Use the Up and Down buttons 1 to tune in the station to be preset. 3) Press and hold the corresponding Preset button * for at least 2 seconds to store the station into memory. [. . . ] This error display indicates that the pickup focus is off because of a scratched disc or some other factor during source unit or CD changer play. This indicates that the CD's TOC (table of contents) cannot be read, for example because the selected disc is upside-down. Er 2 Er 3 Er 6 XA311 11 8. SPECIFICATIONS FM Tuner Frequency Range. . . . . . 87. 9 MHz to 107. 9 MHz Usable Sensitivity. . . . . . 11 dBf 50 dB Quieting Sensitivity. . . . . . 17 dBf Alternate Channel Selectivity. . . . . . 75 dB Stereo Separation (1 kHz). . . . . . 35 dB Frequency Response (±3 dB) . . . . . . 30 Hz to 15 kHz General Power Supply Voltage . . . . . . [. . . ]