User manual CLARION XMA1

[. . . ] Owner's manual XMA1 AM/FM CASSETTE WITH CD CHANGER CONTROL s Contents 1. PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] z: Decreases the volume. The volume level is from 0 (minimum) to 33 (maximum). Audio Mode Adjustments Press the A-M button # to select the adjustment mode. The mode switches as follows each time the A-M button is pressed: BASS TREB BAL FAD Previous mode Loudness Function Press the LOUD button # for at least 2 seconds to turn the loudness function on and off. Switching the Display Press the DISP button % to enter the clock display mode. Operation mode display Clock display Operation mode display Adjusting the Bass 1) Press A-M button # and select "BASS". 2) Press volume button 1 w to emphasizes the bass; press z to attenuates the bass. The factory default setting is "0". (Adjustment range: ­6 to +6) 3) When the adjustment is complete, press A-M button # several times until the function mode is reached. XMA1 5 Setting the Clock 1) Press the DISP button % to enter the clock display mode. 2) Press the DISP button % for 2 seconds or more. This enables clock editing. The editable fields will be indicated by flash. 3) To move between the hour and minute fields, use the SRCH Left (hour) and Right (minute) buttons @. 4) To confirm the clock setting, press the DISP button %. Notes: · If you select another operation mode before completing the above procedure, the clock setting operation will be canceled. · Removing the battery for a check or repair causes the clock to be reset. Set the clock again in such a case. Tape Operation Loading Tapes Open the door by push up the hook. Switching to the Other Side of the Tape Press the PROG button $. Playback is switched to the other side of the cassette tape. FF Scan Function (Intro Music Scan) When the SCN button 6 is pressed, "SCN" appears on the display, and the first 10 seconds of all the tracks on the cassette tape are played. Press the SCN button again to stop scanning. Repeat Function (Repeat Play) Insert the cassette tape into the Cassette insertion slot with the side on which the tape is exposed facing the right. Playback starts automatically. The metal tape setting is set automatically when a metal or chrome tape is loaded. When the end of the cassette tape is reached, the auto reverse mechanism is activated and the other side of the tape begins playing automatically. When the RPT button 7 is pressed, "RPT" appears on the display and the current track is played repeatedly. Press the RPT button again to cancel the repeat mode. Blank Skip Function Use this function to automatically skip to the beginning of the next recorded section when there is a blank section of 12 seconds or more on the tape. When the BLS button 7 is pressed for 1 second or longer, the blank skip mode is set and "BLS" appears on the display. Press the BLS button 7 again for 1 second or longer to cancel the blank skip mode. Listening to a tape which is already loaded Press the FUNC button 2 to select the tape mode. Playback begins automatically. Stopping Playback Temporarily Press the Play/Pause button !. The "BAND" changes as follows each time the "BAND" button is pressed: FM1 FM2 FM3 AM FM1 3) Use the Preset buttons 5 to select the desired station. Mute Use this function to turn off the sound immediately. The sound turns off and "MUTE" appears on the display. Press the MUTE button again to cancel the mute mode. Area Change Function Use this to listen to the radio outside of the United States. Switchable frequency spacing This boat stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U. S. [. . . ] Disc repeat play Press and hold the RPT button 7 for 2 seconds or longer, then the " and "RPT", then the disc currently display shows both the " being played will be played repeatedly. Press the RPT button 7 again to disengage the unit from disc repeat play. 8 XMA1 8. TROUBLESHOOTING Problem Power does not turn on. (or no sound is produced. ) Fuse is blown. Cause Measure Replace with a fuse of the same amperage as the old fuse. [. . . ]