User manual CLASSE AUDIO CDP-300-EN-2-0

[. . . ] Owner's Manual CDP-300 DVD Player WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED PERSONNEL. NOTICE All of us at Classé take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classé components have been officially approved for the European Community (CE) mark. This means that your Classé product was subjected to the most rigorous manufacturing and safety tests in the world. [. . . ] The keys are arranged in logical groups according to their functions. 1 Basic Functions This section along the top of the remote control includes two groups of four functions that control your basic interactions with the CDP-300. The general group is located in the topmost row, and includes: · Light switches the backlighting of the remote control on, for better visibility under low-light conditions. After a few moments of inactivity, the backlight switches off automatically. · Info takes you directly to the status screen in the LCD menu system, displaying several items of information about the CDP-300 and its current operational status. · Disp (for Display) cycles through the three brightness settings of the screen display. · Standby toggles the CDP-300 between standby and operate. The DVD-specific group addresses secondary features of the DVD standard which you may have seen on other DVD players, namely: · Zoom cycles through the available "zoomed in" or magnified views of the DVD. · Angle cycles through the available camera angles of the DVD being watched. (Relatively few discs take advantage of this optional feature of the DVD standard. ) · Audio cycles through the various available soundtracks on the disc being played. (You can set your preference in the menu system, and it will become the default; this button cycles you through the other options, should you want to explore them. ) · Subtitle cycles through the available subtitles in various languages. 2 Numeric Keypad, Programming & Volume The next section down on the remote control provides the numeric keypad for use in directly accessing particular tracks on the CD/DVD you are playing, as well as two keys that are frequently used in conjunction with the numeric keys. The Volume and Mute controls are also in this section. · The Numeric Keypad can be used to access specific tracks/ chapters directly from your remote control. Simply press the appropriate number key (or keys) followed by the Play key. The CDP-300 will go directly to your selection and begin to play. For example, to play track 12, press the 1, 2, and Play keys in sequence. 19 · Time cycles through the four time display modes: time elapsed on track time elapsed on disc time remaining on track time remaining on disc · Prog (for Program) allows you to quickly and easily create a programmed sequence of tracks (or chapters) to be played on the current disc. Pressing Prog will take you directly to the program page of the menu system, regardless of where you might be. Once on the program page, you can change the highlighted track using the Up and Down buttons, and can use the Enter button to toggle whether it is included in the current program. Pressing Prog a second time returns you to wherever you had been. (Note that the program function is not available during play or pause, only when the CDP-300 is in stop. ) · Vol (for Volume) buttons raise and lower the output level of the CDP-300, assuming you are using the analog outputs in their variable output mode. If you set the analog outputs to their fixed, line-level setting, or if you are using the digital output to your preamplifier/processor, these buttons will have no effect. [. . . ] Check that the disc is compatible with your unit. The CDP-300 will play CD Audio, DVD-Video, DVD-Audio, DualDisc, MP3, WMA, AAC, Video-CD, and S-VCD discs. Ensure that the disc surface is clean, and try reinserting it. Check that the label side of the CD is facing up. [. . . ]