User manual CLATRONIC CDP 603 NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] Insert a CD with the label facing upwards and press carefully over the button until it snaps into place. Number of tracks and the total running time. The track currently being played and the time that has elapsed are shown in the display. To remove a CD, press the STOP key, open the CD deck with the OPEN key and take out the CD carefully. Please note these instructions for playing back CDs and CDRs in MP3 format!The device is not able to play back MP3 files. The CD begins to turn, but the sound cannot be heard. Press once = This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. Press a third time = This plays the song before etc. If the button is kept pressed down, the machine starts to search through the tracks (The sound is muted). With this button you can jump to the following track or the next track but one etc. If the button is kept pressed down, the machine starts to search through the tracks (The sound is muted). By pressing once again, the unit is switched off. The following functions can be selected with the MODE key: Press once = , , 1": the current track is repeated continuously. Press a second time = , , ALL": the whole CD is played continuously. If the / II button is pressed, all tracks are played back in random order. It fills the 45-second electronic memory to protect against the jumping of the CD. If the CD is jolted the music data on the CD is read out of an intermediate memory (buffer store) so that playback is not disturbed. Reading errors are subsequently corrected in the intermediate memory. When antishock is activated a bar appears in the display which slowly fills up. Press the button again to deactivate this function. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]