User manual CLATRONIC CTV 629 VT PROGRAMMING

[. . . ] Aerial socket Programs' memory Maximum sound output Power requirement Normal used power Dimensions / Weight Thank you for purchase of this colour TV set. please read this instruction carefully. You will learn how to use TV set and what to do to prolong its service life. The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). [. . . ] If TV station does not broadcast Teletext information, so after switching Teletext on, a black line with page number appear in the top of the screen. Sound level not are adjustable when teletext function are on. Use the P+ or P- to select the language you require. Press the MENU key two times to switch off the Setup menu. The required outer signal source you can select by pressing the AV key on the remote control (depending to the model). Selects red, green and blue signal inputs on the SCART connector. Used for the direct connection of game machines and other equipment. The required picture parameter you can select by using remote control keys P+, P-, and to change value of this parameter by using keys VOL+, VOL-. Quick start guide Tuning your television set You can tune your television set in two ways: automatically or manually. Using the remote control keys P+ or P- select line Auto Tune. Your TV will now automatically tune and store all your local TV stations. On completion of automatic tuning the first programme is automatically shown on the screen and you can select the desired programme by using the remote control buttons P+, P-, 0, 1, . For labelling, moving or hiding of tuned programmes you can use the menu Organize. For better picture quality your VCR or satellite receiver should be connected to SCART socket on your TV set. If you do not use the SCART socket, for receiving VCR signal via aerial socket a programme with number 99 is recommended. Install two batteries into the remote control according to the diagram inside the battery compartment. Plug your aerial into the aerial socket of TV set. Plug your TV power lead into the mains socket and press button on the front panel. If screen of TV does not light, press the P+, P- key or 0, 1, . , 9 key on the remote control, or use P+, P- keys on the front panel to switch the TV set from standby to ON. Your TV set will now automatically tune and store all TV programs. You can move programmes to the desired positions by using menu Organize now (see "Customizing your stored programmes"). [. . . ] Using the VOL+ and VOL- keys enter the correct time. The hours (00 to 23) are set by using VOL-, and the minutes (0 to 59) - by using VOL+. Using the P+ or P- keys, highlight On Timer, and using the VOL- and VOL+ keys enter the time, at which you want TV set to switch ON from standby. Using the P+ or P- keys, highlight Off Timer, and using the VOL- and VOL+ keys enter the time, at which you want TV set to switch to standby from ON. [. . . ]