User manual CLATRONIC DVD 622 LCD NEW

[. . . ] The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated , , dangerous voltage" within the product`s enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. This product contains a low power laser device. The symbol for Class II (Double lnsulation) This symbol means that the unit complies with European safely and electrical interference directives. [. . . ] ⷠPress the GOTO button to set your desired point to start playback, then press the ENTER button to confirm. When a disc with only one angle is played back, , , Angle 1/1" is displayed. The subtitle number and language currently selected is displayed. When a disc with only one subtitle is played back, , , 1/1 Eng" is displayed. This function allows you to skip directly to any part of the disc while a disc is playing. note : · After setting, press the DISPLAY button again on the remote unit to return to the normal screen. If a DVD disc contains title numbers, you can locate a specific title by directly selecting a title number. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want. The unit will start playback about 3 seconds later. If you know the title / chapter / track number you want to play, you can locate a specifc title / chapter / track by directly selecting a title / chapter / track number. Press , or button to highlight a title / chapter / track and press the corresponding number button(s) for the chapter you want. The unit will start playback about 3 seconds later. You can move to a specific location by entering its corresponding time (hours, minutes, seconds) 1. Press the corresponding number buttons for the setting point you want. ⷠThe first two numbers you entered represent hours. ⷠThe second two numbers you entered represent minutes. ⷠThe third two numbers you entered represent seconds. The unit will start playback about 3 seconds later. notes: · Some discs may not respond to this process. ⷠSome scenes may not be located as precisely as you specified. ⷠThis method for accessing specific locations is available only within the current title of the DVD disc. ⷠYou can move through the menu by pressing the and buttons. [. . . ] Remove any obstacles between the remote and the unit. DVD No sound or only a very low-level sound is heard Press the PLAY button to return to normal play mode. Press the PLAY button to return to normal play mode. ⷠMake sure that AUDIO output and AV IN input connections are correct. [. . . ]