User manual CLATRONIC HM 2935 OTHER MANUAL

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Do not operate the mixer for more than 5 minutes!Then let it cool down for approximately 10 minutes before using it again!Assembly of the Whisk/Kneading Hook/Beater Press the two whisks or kneading hooks on the bottom by turning slightly until they lock in place. Note: The kneading hook/whisk must be inserted into the correct opening of the mixer!Please ensure that the speed switch (2) is turned to , , 0/OFF". Always choose a utensil and a speed according to the following table Product/Type of Preparation Heavy dough (e. Note: For optimum results use high-walled vessels that are not too large. Turbo Switch (1) This is for switching to maximum speed for a short time. press at short intervals for pulsed mode operation. WARNING: Do not use this function for more than 2 minutes!In order to release the hook, press the release button (3). Before cleaning the equipment, always remove the mains plug from the socket. Only a damp cloth should be used for cleaning the outside of the machine. Do not use any caustic or abrasive detergents. Removable parts that have been in contact with the dough or mixture (kneading utensil and whisk) can be cleaned in soapy water. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]