User manual CLATRONIC SR 595 CD NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] Tune into the desired station using the TUNING regulator (14). The stereo control lamp FM/ST in the station scale (13) only lights up if you have selected FM stereo and the station is being received in stereo quality. If reception is too weak and there is interference, it is possible that the stereo control lamp will not light up. On this frequency band all programmes are transmitted only in "mono". The desired volume can be sent using the VOLUME regulator (21). Insert a CD with the printed side facing up and close the CD deck. "- -" appears in the display (6) followed by the number of tracks. Press the / II PLAY/PAUSE button (7) in order to play the CD. With I SKIP/SEARCH (4) you can jump to the next or previous track etc. If the button is kept pressed down, the machine starts to search through the tracks. The I SKIP/SEARCH button (5) can be used as follows: Press once = This starts the current track again from the beginning. Press a second time = This jumps back to the previous track. If the button is kept pressed down, the machine starts to search through the tracks. In order to remove a CD, please press the STOP button (8), open the CD compartment and lift the CD out carefully. When a CD is playing the REPEAT button has a repeat function. First start the CD and then press the REPEAT button. Press once (The left hand dot in the display flashes, while the right hand dot lights up. ): the current track is repeated continuously. Press a second time (both dots in the display light up): the whole CD is played continuously. Programmed Repeat with the PROGRAM Button This can be used to program any desired sequence of tracks. Use the II SKIP/SEARCH buttons (4/5) to select the desired track and then press the PROGRAM button (3) again. The display changes to memory slot , , 02". [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]