User manual CLATRONIC SRR575 NEW

[. . . ] If the device is not used for a longer period, remove the plug connector from the plug socket or take out the batteries. These symbols may be found on the machine and are intended to indicate the following: The lightning symbol should advise the user of parts in the inside of the device which carry dangerously high voltage levels. The symbol with an exclamation mark should advise the user of important operation or maintenance instructions in the accompanying documentation. Devices bearing this symbol work with a , , class 1 laser" for tracing the CD. [. . . ] When switching from one function to another, or in order to stop the cassette, always press the / STOP/EJECT button (15). In order to interrupt playback for a short time, press the II PAUSE button (14). Press the PAUSE button for a second time in order to continue playback. Insert an audiocassette with the side on which you wish to record facing forwards (full reel on the right). Ensure that the cassette is not copy-protected (the copy protection tab on the top narrow side of the cassette must not have been removed). Select the source from which you wish to record with the function switch (24) and then start playback from this source if necessary. The sound source which you are listening to is the one from which the recording is made. the recording level is controlled automatically. Any changes to the sound and volume do not affect the recording. The recording can be interrupted briefly by pressing the II PAUSE button (14), or stopped with the / STOP/EJECT button (15). Insert an audio CD with the printed side facing upwards onto the central cone until the CD locks in place. The symbol "- - -" appears in the display (9), followed by the word "CD" and the number of tracks. Press the / II PLAY/PAUSE button (5) in order to play the CD. Playback begins automatically with the first track on the CD. The title currently being played and the symbol are shown in the display. Description of the CD Buttons GB PLAY/PAUSE (5): When pressed once, this button briefly interrupts playback. SKIP (4): By lightly pressing either the I/I button you can jump one track forwards or backwards. Press three times: The unit will enter INTRO play mode, INTRO will show in the display. Press four times: The unit will enter RANDOM play mode, RANDOM will show in the display. Press five times: The function is deactivated and the CD is played in the normal mode. Programmed Play This can be used to program any desired sequence of tracks. Use the I/I buttons (4) to select the desired track and then press the PROGRAM button (8) again. [. . . ] Without proof of purchase no free replacement or repair will be carried out. For repairs or replacement during the life of the guarantee return the device in its original packing together with the proof of purchase to your dealer. *) Damage to accessories does not mean automatic free replacement of the whole machine. in such cases please contact our hotline. [. . . ]