User manual CLATRONIC VCR 598 NEW

[. . . ] RF cable Important Copyright Information Unauthorised recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We do not take responsibility for the unauthorised duplication, use, or other acts which infringe upon the rights of copyright owners. A Note About Recycling This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. [. . . ] "ON" will then disappear from the menu. Picture Select This function enables you to select the picture quality of a tape. ⷠUse the remote control for this procedure. This shows the elapsed recording or playback time in hours, minutes, and seconds. The " ­ " indication will appear when the tape is rewound further than the tape counter position "0:00:00". Timer Recording You may program the VCR to start and end a recording while you are away. You can set 8 programmes to record on specific days, daily or weekly within a 1-year period. ⷠUse the remote control for this procedure. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording. Note: Once you select the Picture Select mode, it stays in effect even after you turn off the VCR. When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After that, the VCR will eject the tape and turn itself to off. ⷠThe tape will not auto-rewind during timer recording or One Touch Recording. ⷠWhen the Counter Memory is activated, the tape will rewind to the M0:00:00 position and the VCR will enter the Stop mode. A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). ⷠIf a timer recording is set, a tape can only be ejected with the power on. If you have not set the clock yet, "CLOCK" setting menu appears. FWD/B after pressing PLAY/o or STOP/L during steps 3) to 9), the input mode will move to the next step. FWD/B within 5 seconds of setting an item, the input mode will move to the next step. ⷠPress REW/s to go back one step from the current setting during steps 4) to 10). If REW/s is pressed when the TIMER NUMBER is flashing, the entire programme contents will be erased. Press PLAY/o or STOP/L repeatedly until the desired programme number appears. [. . . ] If removed, cover the hole after the tab with adhesive tape. Head cleaning is necessary, consult the nearest Authorized Service Centre. Adjust tracking control for a better picture by using CHANNEL (o/p). You cannot copy a copyrighted video tape. [. . . ]