Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual CLATRONIC VL 2947 S. We hope that this CLATRONIC VL 2947 S user guide will be useful to you.
Lastmanuals help download the user guide CLATRONIC VL 2947 S.
Manual abstract: user guide CLATRONIC VL 2947 SNEW
Detailed instructions for use are in the User's Guide.
[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] Front protection grid Fastening hooks Fastening screw Propeller fastening ring Propeller Safety bolt for the rear protection grid 7 Rear protection grid 8 Motor shaft 9 Motor 1 2 3 4 5 6 10 Gear casing 11 Stand/gear casing connection screw 12 Height adjustment locking screw 13 Stand tube 14 Cover cap 15 Base cap 16 Base 17 Setting knob The device must be completely assembled before use!To line the base cap (15) push the cover cap (14) to the lowest position on the stand tube (13). Mount the rear protection grid (7) into the relevant slots and screw on the safety bolt (6) for the rear protection grid (7) by turning it clockwise. Screw on the fastening ring for the propeller (4) by turning it clockwise. Note: Ensure that the holes for the attachment screw in the front and rear protective grille are aligned one above the other. Tighten the protective grille with the attachment screw supplied. Before inserting the plug into the socket. Make sure that the mains voltage to be used matches that of the device. You can find this information on the nameplate. You can adjust the inclination angle by tipping the blower casing with both hands. Operating To select the fan speed use the selector on the front to set one of the following speeds: 1 = slow, 2 = medium, 3 = fast. shift to , , 0" to switch off the device. Blower Direction/Oscillation You can choose from the two following options: 1. Turn the device carefully with by hand by holding the fan on the sides and turning it either to the left or to the right until the limit stop. The device must have been switched off before. This function is active only when the fan is on. Never dip the device in water when cleaning. If the device is very dirty wet a cloth with water and then wipe the device dry once you have finished. [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE CLATRONIC VL 2947 S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual CLATRONIC VL 2947 S will begin.
