User manual CLATRONIC ZP 2891 NEW

[. . . ] Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. [. . . ] replacing and removing the conical press · The small pressing cone (3) is placed directly on the guide mandrel until it is flush with the filter sieve (4). ⷠThe large press (2) is placed on the small press, which acts as an adapter. The two presses can be separated by pulling. Large press cone = large citrus fruit (oranges, grapefruit, etc. Small pres cone = small citrus fruit (lemons, limes, etc. Hold the lemon squeezer with one hand while pressing the fruit halves on the press cone with the other. the machine starts turning automatically. Results can be improved by releasing the pressure and then pressing again. this changes the direction of rotation. CAUTION: Do not use the device for more than 10 minutes!Before removing the glass, press the spout upwards in order to seal the aperture of the juice container and prevent any drips. Pull the plug out of the socket after use and clean the device as described below. Mains lead take-up The mains lead can be wound up on the base. IMPORTANT: The citrus juices should be consumed as soon as possible. Clean the lemon squeezer every time it is used. Clean the juice container, the filter, the two pressing cones and the transparent lid in soap and water. Clean the outer motor casing and the wire with a slightly moist cloth and then wipe with a dry cloth. After cleaning all the parts you can assemble them as described in , , Overview of the Components". [. . . ] Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e. Motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc. [. . . ]