User manual CLIFFORD 50

[. . . ] World-Class Auto Security TM concept 50 Owner's Manual All Concept Series systems are covered by one or more of the following Clifford Electronics patents: 4, 158, 874; 4, 233, 642; 4, 327, 444; 4, 383, 242; 4, 430, 685; 4, 845, 464; 4, 887, 064; 4, 890, 108; 4, 922, 224; 4, 997, 053; 5, 081, 667; 5, 146, 215; 5, 157, 375 and other patents pending Table of Contents Standard Features of the Concept 50 . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Built-in vehicle recovery/anti-carjacking circuitry Digit . Disarming code PlainView switch Entering a digit . [. . . ] See User-selectable features on pages 19­21. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on pages 19­21. Instant AutoArming bypass: Prevents AutoArming when fueling the vehicle and other times when you wish to temporarily bypass AutoArming. To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF. " You will hear a single siren chirp to confirm that the system will not AutoArm. The system reverts to its normal operating mode when you next start the engine. 12 UltraSecureTM valet mode Within seconds, thieves can disable all other alarm brands by hot-wiring the ignition and flicking an easy-to-find "hidden" valet switch. Concept 50 has safeguards that absolutely ensure that a thief or carjacker cannot enable the valet mode as a way of "turning off" your system. To enter valet mode, the driver must first enter the secret disarming code. Whenever the system is put in valet mode, all of the security and anti-carjacking features are switched off. At various times, you will need to switch the system off. For instance, when having your car serviced, washed or parked by a valet. Remember: When your car will be driven by someone else (such as a mechanic) who will not know your disarming code, you must place Concept 50 in valet mode, otherwise your car will be immobilized. NOTE: If you temporarily lose the use of your remote controls, you can disarm the system by enabling valet mode. Turn the ignition switch to its "ON" position or start the engine. Enter your secret disarming code on the PlainView switch, then return the switch to its center position. You now have 3 seconds to flip the switch to the latched position (valet mode). Once you have enabled valet mode, the system's LED will glow continually for on-going visual confirmation of valet mode. Keyless entry in valet mode: Even if valet mode is enabled, you can still remotely control the convenience features. For instance, simply press button 1 (channel 1) as if you were disarming. The doors will unlock (as indicated by one flash of the parking lights) and the interior lights will illuminate. Press button 1 (channel 1) again and the doors will lock (indicated by two parking light flashes). You can also use the remote control's other channels to activate options such as a remote trunk release or remote engine starting. To exit valet mode 1. Turn the ignition switch to its "ON" position or start the engine (you may also perform the following while driving). Flick the switch back to its center position. [. . . ] You will hear two chirps to confirm the new duration. EXAMPLE 1: Turn off siren sound number 2: 1. Look for the siren's sound number 2 location on the Matrix. The location is at the intersection of column 1 and row 2. With the ignition on, enter you disarming code on the PlainView valet switch, then hold the switch in its momentary position until you hear a chirp and see the LED turn on. [. . . ]