User manual CLIFFORD 6000

[. . . ] United Kingdom customers: Please pardon our American English references and spellings. Trunk and hood references indicate the boot and bonnet, respectively; parking lights are indicator lights; gasoline is petrol. Standard Features The following are standard features of this system. Some vehicles may require optional parts/wiring and a few are incompatible with some features. þ þ þ EC-approved (Europe) Lifetime warranty (see terms & conditions) Two remote controls n Extended range n ACG 2TM Anti-CodeGrabbing protection n Low remote control battery warning þ þ þ Smart optional remote trunk release prevents falsing Ignition-switch controlled AutoLocking/AutoUnlocking Remote panic feature n Smart panic locking/unlocking based on whether the engine is on/off þ þ PlainView 2TM coded valet mode n Select your own secret code þ þ þ Built-in timer circuit for optional timed headlight activation or turbo timer Built-in parking light flasher Courtesy light(s) turn on when you disarm with the remote Smart AutoTesting self-diagnostics n With specific trigger & sensor identification þ þ þ Remote controlled valet mode Built-in two-point AutoImmobilizer Dual-Zone Piezo Sensor detects both minor impacts and theft-related tampering Glass Tampering Sensor detects attempts to break windows Smart DataPort input n For complete optional control of your system via your þ Malfunction AutoBypass n Automatic trigger remonitoring if trunk/hood was open when þ þ arming þ Smart Prior Intrusion Attempt Alert n With specific trigger & sensor identification Windows PC n For smart accessory interfacing þ þ þ TotalRecall 8-event trigger/sensor memory report n With specific trigger & sensor identification FACT anti-false alarm circuitry Passive AutoArming if you forget to arm with the remote control n Lock upon AutoArming self-locking n Visual AutoArming countdown confirmation n Instant AutoArm bypass þ þ þ Remote control code learning Clear all remotes if ever lost or stolen LED status indicator n Flash indications reveal status n Automatic battery saving mode þ High-Output Insignia Siren n Remote controlled chirp muting n Selectable QuietChirps/LoudChirps n Long-term selectable chirp muting n Remote siren silencing without disarming if falsely triggered þ þ þ Multiple vehicle control from the same remote control Multiple sensor/trigger inputs User-programmable features n SecureAccess coded programming n Programmable even while driving þ Power door lock control (some vehicles may require optional relays) NOTE: Your system MUST be installed by an Authorized Clifford Dealer in accordance with the in structions we sup ply them. The sys tem is intended for automobiles with a 12- volt battery and gasoline- or diesel-powered en gine. [. . . ] n Long-term chirp silencing: You may silence the arm and disarm chirps on a long-term basis until you decide to restore them. Your vehicle's parking light flashes will continue to provide visual confirmation of remote controlled system arming and disarming. the programming procedure or via the CliffNet Wizard software. See User-selectable features. n Selectable siren duration (non-European models only*): You may change the factory set 30-second siren duration to 60 or 90 seconds via n Personalized Siren Sounds (requires the Self-Powered SmartSiren 4 option) (non-European models only*): The optional Self-Powered SmartSiren 4 sounds six different alarm sounds. You may turn any of the six sounds on or off via the User-selectable features programming to create a different combination of sound patterns. So if you hear a siren at a distance, you will know for sure whether it is your car or someone else's. See User-selectable features (column 1, row 2). What's more, with the optional CliffNet Wizard software and DataPort Replicator Cable, you may select up to six sounds from more than a dozen different siren sound choices for truly unique customization. n Choose when your Personalized Siren Sounds* play: For more information at a distance, you may choose to have your Personalized Siren Sounds "play" every time the alarm is set off, or you may set the system to sound them only upon trigger activation. When set to "trigger only" the basic siren wail will sound if a sensor is activated, but the Personalized Siren Sounds will play if the hood, trunk or a door is opened. See User-selectable features (column 1, row 3). * EC regulations prohibit this feature in Europe How to interpret the LED status indicator The LED on your car's dashboard or console will inform you of the system status: LED Condition Off On Meaning System is disarmed and in normal operating mode (i. e. , valet mode is off) Valet mode is on, the vehicle may be entered without having to disarm Flashing rapidly (ignition off) System is armed and protecting your vehicle Flashing slowly Flashes, pause, flashes System is disarmed but the Two-Point AutoImmobilisation has been engaged (European models only) Either an error (such as arming with the trunk open) or indicates the trigger or sensor that was tripped Automatic Battery-Saving Mode To conserve vehicle battery power (the LED actually draws more current than the entire control unit), if the system has remained continuously armed for 48 hours, the flash rate will automatically slow to half the normal rate. After 96 hours, it slows to one-quarter. Smart trunk release option If the optional remote trunk release was installed, you may use the button to remotely release the trunk latch. The system's electronic interlock prevents unintentional activation of the remote trunk release when you drive, or when the system is armed. The Smart Trunk Release feature requires installer programming, so if you have the optional trunk release installed, you may want to verify that it will NOT activate when the system is armed. If it can be activated while armed, causing the alarm to sound, please return to your installing Clifford Dealer and have them correct this (it only takes a couple minutes and there will be no charge to you). 6 Timer options The system's built-in electronic timer can be optionally wired to provide one of several different functions. Timer duration settings can be made by your installing Clifford Dealer or by you via the CliffNet Wizard. Ask your Authorized Clifford Dealer for further details: Remote controlled timed headlight activation option The timer can be wired to provide remote controlled headlight activation for any duration you wish between 1 second and 4 minutes, allowing you to remotely light your way to and from the vehicle by pressing the button on your remote control. Window AutoClose option The timer can automatically close the windows upon remote arming on vehicles with an "all-close" feature that raises them if the key is held in the driver's door (a common feature on several European vehicle models). NOTE: Although this timer circuit could be wired to control power windows on non-European cars that do not have this key-in-the-door "all-close" feature, Clifford Electronics strongly recommends against this. If so wired, the timer would force the window motors to "shut" the windows even if they were already closed. This places excessive strain on the vehicle's window motors, causing overheating, premature failure and even the possibility of fire. As such, if you cannot close the windows of your vehicle by turning and holding the key in the driver's door, do not permit the system's timer circuit to be wired to automatically close the windows. If your car does not have an all-close feature, one or more SmartWindows 4 accessories are needed. [. . . ] You must now add new/existing remotes with the "Add new remote control" feature and/or the "Other vehicle`s remote" feature. NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code, wait for the two chirps, then turn off the ignition (you'll hear 3 chirps to confirm program mode exit). You MUST now turn the ignition back on and then re-enter your new code. If the LED flashes on, your new code has been accepted. [. . . ]