User manual CLIFFORD ARROW 2

[. . . ] World-Class Auto Security TM Arrow II Owner's Manual Table of Contents Standard Features of the Arrow II . 5 Your 2-button/3-channel remote controls . 5 Optional Anti-CodeGrabbing (ACG) remote controls . . 6 How to interpret the chirps and parking light flashes . [. . . ] You will hear two chirps and the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. * Press button I again. One chirp and one parking light flash confirms disarming. In addition, the doors will automatically unlock* and the interior lights will turn on* and stay on for 30 seconds or until you start the engine, whichever occurs first. Simultaneously press both buttons I and II to transmit channel 3. The system will arm or disarm with all the indications noted above except the chirp acknowledgments. Button II can control a remote trunk release or other optional accessory, such as headlight activation feature of the NightVision Headlight Automation System, remote power window operation via the SmartWindows accessory, or operate your garage door opener via Clifford's Garage Door Receiver. The parking lights will flash and the siren will blare for 30 seconds, or until you press button I again to turn it off. If the ignition is on (indicating you are in the car), the doors will lock* to prevent an assailant from entering. If the ignition is off, the doors will unlock, * allowing you to enter immediately without fumbling with your keys. * Some vehicle require optional relays. . TO REMOTELY OPEN THE TRUNK OR TO ACTIVATE A DIFFERENT OPTION . TO ACTIVATE THE PANIC FEATURE . . Optional Anti-CodeGrabbingTM (ACGTM) remote control(s) ACG is an optional Clifford exclusive that protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves -- a code-grabber. Code-grabbers literally record, from hundreds of feet away, the code sent by your car alarm remote control. Then the thief simply plays back the code when you're gone, instantly disarming the alarm and unlocking the doors. All you need is one or more optional Clifford 4-button/12-channel ACG remote controls. These ACG remote controls use complex digital signal processing and unbreachable encryption to randomly change the digital code every time you use the remote control. Your remote will never transmit the same code twice, and the control unit will never accept the same code twice. Arrow II has these additional features: AutoArming enable/disable: If you prefer, you may deactivate or reactivate the AutoArming feature. See User-selectable features on page 10. Visual acknowledgment: Five seconds after you exit the vehicle and close all the doors, the parking lights will flash twice to confirm that the AutoArming countdown is progressing. Then, 25 seconds later, the system will AutoArm. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on page 10. Instant AutoArming bypass: Prevents AutoArming when fueling and other times when you wish to temporarily bypass AutoArming. To activate Instant AutoArming Bypass, rapidly turn the ignition switch to "ON" then "OFF" twice. [. . . ] The system will arm or disarm with all the usual indications except the siren chirp(s). Long-term chirp silencing lets you set turn off the chirps until you decide to turn them back on. Just use the programming procedure noted on page 10. SmartPowerUpTM II If power is ever removed, SmartPowerUp II ensures the system will automatically restore itself to its previous state when power is restored. [. . . ]