User manual CLIFFORD EAGLE 2

[. . . ] World-Class Auto Security TM Owner's Manual Table of Contents Standard Features of the Eagle II . 6 Your 4-button/12-channel remote controls . 6 How to use your keychain remote control . 6 Anti-CodeGrabbing (ACG) with Random Code Encryption . [. . . ] Channel 5 can be used to remotely enter or exit valet mode. See pages 9 and 10 for details. 8 TO DISARM THE SYSTEM . . TO SILENTLY ARM OR DISARM THE SYSTEM . . Anti-CodeGrabbing (ACG) with Random Code Encryption ACG protects you and your automobile from the most effective and onerous car stealing device ever used by car thieves -- a code-grabber. Code-grabbers literally record, from hundreds of meters away, the code sent by your car alarm remote control. Then the thief simply plays back the code when you're gone, instantly disarming the alarm and unlocking the doors. Your Eagle II has Clifford Electronics' proprietary ACG technology, which uses complex proprietary digital signal processing and unbreachable encryption to randomly change the digital code every time you use the remote control. Your remote will never transmit the same code twice, and the control unit will never accept the same code twice. Clifford Electronics also offers an optional ACG interface (#64-128/ACG) to your electric garage door/gate opener that not only allows you to command your garage door and/or gate opener(s) via your Clifford remote control, but also protects your garage and home from burglars with code-grabbers. Tamper-proof dual-point AutoImmobilisation While armed, the system assures that your vehicle is completely immobilised by automatically locking out both the ignition system and the starter motor. That means that a thief won't be able to start the engine even if he had a duplicate of your car key. In fact, even if he were to find the system control unit and tear it out of your vehicle, he still would not be able to start your car's engine!Dual-sensor protection Your Eagle II system has two sensors: An all-electronic Piezo Sensor that detects intrusion-related vibrations and impacts as well as a Proximity Sensor passenger compartment radar sensor that detects any movement inside the vehicle. Both the Eagle II's Piezo Sensor and the Proximity Sensor are impervious to the wind and temperature variations that cause ultrasonic and electromechanical sensor to falsely alarm. AutoLock/AutoUnLock For your safety and that of your passengers, the vehicle doors will automatically lock the instant you turn on the ignition switch to start the engine. When you switch off the ignition to shut down the engine, the AutoUnLock feature automatically unlocks the doors. To suit your preferences, the AutoLock/AutoUnLock feature can be disabled or re-enabled (see User-selectable features on pages 14-15). 9 AutoArming If this feature is enabled and you forget to remotely arm, the system automatically arms itself 30 seconds after the vehicle doors are closed. If you re-open any door(s) within the 30-second countdown, AutoArming will restart from the beginning once all doors are closed. Eagle II has these additional AutoArming features: AutoArming enable/disable: If you prefer, you may deactivate or reactivate the AutoArming feature. See User-selectable features on pages 14-15. AutoArm & Lock: To ensure you can't accidentally lock your keys inside the car, the system is factory-set not to lock the doors upon AutoArming. To change this setting, see User-selectable features on pages 14-15. Visual acknowledgment: Five seconds after you exit the vehicle and close all the doors, the indicator lights will flash twice to confirm that the AutoArming countdown is progressing. [. . . ] In addition, the system also provides these features: Long-term chirp silencing: You may choose to silence the arm/disarm chirps until you decide to restore them. Indicator light flashes will provide visual confirmation of remote arming and disarming. See User-selectable features on pages 14-15. Remote controlled chirp muting: This is especially valuable when parking late at night in a quiet residential area or any other time when you want to arm or disarm silently. To do so, simply press button 3 (channel 3) on your remote control instead of the usual button 1 (channel 1). Siren duration: When the system detects an intrusion attempt, the alarm is set to sound for 30 seconds. [. . . ]