User manual CLIFFORD MILLENNIA

[. . . ] The Science of SecurityTM INTELLIGUARD MILLENNIA Complete Owner's Manual USA Headquarters 20750 Lassen Street Chatsworth, California 91311 1-800-CLIFFORD or 1-800-824-3208 or 1-818-709-7551 Canada Headquarters 4513 Dobrin Street Montreal, Quebec H4R 2L8 1-800-361-3444 or 1-514-332-4444 UK Headquarters Boundary Business Court 92/94 Church Road Mitcham, Surrey CR4 3TD 0800 929949 or 0181 646 8440 Germany Headquarters Schlesische Straße 27 10997 Berlin 0130 115 681 oder 030 611 2602 Mexico Headquarters Saratoga 804 B, Col. Benito Juárez 03300 México D. F. 01 800 021 2543 o 5 605 0382 Clifford systems are covered by one or more of these Clifford Electronics USA patents: 4, 158, 874; 4, 233, 642; 4, 327, 444; 4, 383, 242; 4, 430, 685; 4, 845, 464; 4, 887, 064; 4, 890, 108; 4, 922, 224; 4, 997, 053; 5, 081, 667; 5, 146, 215; 5, 157, 375; 5, 467, 070; 5, 650, 744 and other patents pending United Kingdom customers: Please pardon our American English references and spellings. Trunk and hood references indicate the boot and bonnet, respectively; parking lights are indicator lights; gas/gasoline is petrol; a parking lot is a car park; windshield is windscreen. Standard Features The following are standard features of this system. [. . . ] See User-selectable features (column 1, row 3). *Not available on European models in compliance with EC95/56 NightVisionTM All of the following NightVision Headlight Automation features are built into your IntelliGuard Millennia: n User-selectability: You may turn the NightVision features on or off whenever you wish (see User-selectable features). n n n While driving at dusk: The system automatically turns on the headlights. The system automatically turns off the headlights. While driving at dawn: User-selectable activation threshold: n n n n n The NightVision electronics have a preset threshold that automatically turns on the headlights at about the same time as the public street lights turn on. If you find that your vehicle's headlights come on significantly earlier or later than the street lights, you may change NightVision's headlight activation threshold. See the User-selectable features (column 3, row 7) to change the threshold. To set the headlights to turn on when it is darker, select the "darker" setting, to have them turn on when it is lighter, select the "lighter" setting. The CliffNet Wizard software provides even greater incremental activation threshold control. The NightVision electronics automatically turn the headlights on or off only when necessary. For instance, if it is dark when the car's engine is started, NightVision instantly turns on the headlights. When the vehicle is briefly driven under an overpass in daylight, the headlights will not turn on. Even more importantly, when passing through a brightly lit area at night, the headlights will not switch off. However, if you drive into a dark parking structure during the day, NightVision will turn on the headlights within five seconds of entering the structure. Intelligent activation: When parking at night: NightVision keep the headlights on for any post-parking duration between one second and 4 minutes (factory preset to 10 sec. ; see User-selectable features column 3, row 5) after you turn off the engine to light your path away from the vehicle. If you don't care for this feature, you may use the User-selectable features programming (column 3, row 6) to select all NightVision features except post-parking illumination. Pressing button 4 on your master remote or button (companion remote) will activate the headlights for any duration you select between 1 sec. (factory preset to 10 sec. ; to change the duration, see User-selectable features column 3, row 5). When you turn on the windshield wipers NightVision automatically turn on the headlights to increase your vehicle's visibility to all other drivers on the road. This is also a great battery-saving feature since you don't need to remember to turn off the headlights after driving in the rain during daylight hours. If using intermittent wipers, just measure the maximum amount of time between wiper activations, add a second, then program the Headlight Duration (feature column 3, row 5) for that amount of time using the User-selectable features. If you wish to manually turn on the headlights, simply turn on your vehicle's headlight switch. Remote timed headlight activation: RainCheck: Manual control of headlights: & Digital Tilt/Motion Sensor This sensor ontinually analyzes all pitch, yaw and motion data to unerringly detect as little as one degree of lifting and/or any forward/reverse rolling while completely ignoring all other conditions that falsely set off all other sensors. Even if you park on a hill, the Digital Tilt/Motion Sensor will accurately respond to the first hint of tampering to reliably protect your wheels and entire vehicle. This sensor adjusts itself automatically the instant you arm your system. Remotely Adjustable Digital Dual-Zone Proximity Sensor 4 Your system's other sensor, the Digital Dual-Zone Proximity Sensor 4, detects movement inside the passenger compartment and very near your vehicle. If a thief lingers very close to your windows, a warning tone sounds; if he were to lean into the passenger compartment, the primary zone of this sensor would trigger the full alarm. This sensor uses radar waves to detect movement. [. . . ] NOTE 4: Immediately PRESS THE BLANK BUTTON, THEN enter your new code, wait for the two chirps, then turn off the ignition (you'll hear 3 chirps to confirm program mode exit). You MUST now turn the ignition back on and then re-enter your new PIN code. If the LED flashes on, your new code has been accepted. If the LED does not light, the two codes did not match and the system has reverted to your previous code. [. . . ]