User manual CLIFFORD PRIME LEVEL 3

[. . . ] Color profile: Disabled Composite Default screen Welcome to the world of high-technology vehicle security and convenience Your Clifford Electronics Prime Level THREE security upgrade package adds extensive security features to the keyless entry functions of your vehicles factory remote. TO ARM SECURITY: TO DISARM SECURITY: Lock the doors with your factory remote control. * The LED inside the car will flash repeatedly to confirm that the starter motor is electronically immobilized and the doors will be monitored. Unlock the doors with your factory remote control. * The LED will stop flashing and the system will restore starter motor function. [. . . ] You can change settings, customize features, view a chronological history of trigger and sensor activations, and much more. To learn more and download this free software, go to www. clifford. com/wizard. Smart prior intrusion attempt alert If the alarm sounded while you were away, the system will provide 3 horn beeps (if so wired) when you remotely unlock to alert you to approach with caution. 2 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:07:59 1999 Color profile: Disabled Composite Default screen Smart AutoTestingTM If a door is ajar when you remotely arm, youll hear the usual 2 beeps (if so wired), then, 5 seconds later, 4 more beeps (this warning is not possible on vehicles that have delayed or dimming courtesy lights). Valet Mode Valet mode lets you override all security features if your factory remote fails or needs a new battery. Coded valet mode via the valet switch NOTE: If you lose the use of your remote (lost; dead battery; etc. ), you can turn off the alarm by enabling valet mode. To enable valet mode, you enter a code on the switch mounted behind the underdash LED assembly. Entering the code To enter the code, toggle the valet switch to the left 2 times, then once to the right. The system's factory-set valet code is 2: left, left, right. To set your own code, request programming instructions from Clifford Prime Customer Service at 877-48-PRIME or download from www. clifford. com/prime. ! 3 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:07:59 1999 Color profile: Disabled Composite Default screen To enable valet mode 1. Turn the ignition on or start the engine (you may also do this while the engine is running). Enter your valet code (factory-set valet code is 2: left, left, right) on the switch mounted behind the LED assembly. 3. Continue holding the switch to the right for 5 seconds, then release. The LED will stay on for ongoing visual confirmation of valet mode. To exit valet mode and restore normal operation 1. [. . . ] To do so, request programming instructions by calling Clifford Prime Customer Service toll-free at 877-48-PRIME or download from www. clifford. com/prime. Or use the CliffNet Wizard Windows software (see page 2). 877-48-PRIME www. clifford. com/prime © Clifford Electronics 1999 " 31-923B/P3om/0799 4 D:. . . 31-923 level 3 owners. vp Mon Jul 26 16:08:00 1999 [. . . ]