User manual CLIFFORD PROXIMITY SENSOR 4

[. . . ] T Digital Dual-Zone Proximity Sensor IV Owner's Manual he Digital Dual-Zone Proximity Sensor IV defines the new state of the art in radar sensing technology. It is the only radar sensor that can clearly determine the difference between a lurking thief and other conditions that cause other manufacturer's radar sensors to false alarm. [. . . ] While other manufacturer's sensors require repeated trips back to your alarm installer, the Digital Dual-Zone Proximity Sensor IV permits you to make the changes yourself, easily and accurately. continued . . The innovative sensor control panel of the Digital Dual-Zone Proximity Sensor IV makes setting sensitivity for each of the two zones a breeze. The control panel window has five LEDs: four green LEDs to indicate the 32-step sensitivity level of each zone, and a red LED on the left to confirm inner zone activation. The last green LED on the right also doubles as the outer zone activation light that visually indicates whenever the outer zone senses motion. Each green LED has 8 different steps to indicate sensitivity setting: OFF, six steps of slow to rapid flashing, and constant ON. To increase or decrease sensitivity of either the exterior or interior zone, simply do the following: 1. Select the zone you wish to adjust by sliding the "select zone" knob. Press the minus (­) button once to lower sensitivity one step of the plus (+) to increase sensitivity. The green LEDs will indicate the change as noted above. Exit the vehicle and test your new setting. [. . . ] If needed, use the (+) and (­) buttons to make further adjustments, then retest. If the other zone needs adjustment, repeat steps 1-4. © Copyright Clifford Electronics, Inc. , 1994 31-254A/DPS4OM/1294 [. . . ]