User manual COBRA MT 525

[. . . ] (Always use high-quality alkaline batteries. ) Position batteries according to polarity markings. Replace Battery Compartment cover and belt clip. NOTE: See "Optional Accessories" for accessory availability and ordering instructions. Battery Charging Charge Tab Charging Batteries When the optional NiMH battery pack (part No. FA-BP) is used, the batteries can be charged using the optional rapid wall mount charger (part No. [. . . ] Press the MODE/LOCK button to enter the new setting and proceed to "Turn Roger Beep On or Off" selection. Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE. NOTE: The MODE/LOCK button has dual functions. Press and release to enter Mode Function. Press and hold to enter Lock Function. OPERATION "Roger Beep" Confirmation Tone English Roger Beep Icon Your listener will hear an audible tone when you release the TALK button. This alerts the other party that you have finished talking and that it is OK for them to speak. To Turn "Roger Beep" On or Off: When you turn On your microTALK® radio for the first time, "Roger Beep" Mode/Lock Button Select Roger Beep will be On. Press and release the MODE/LOCK button until the "Roger Beep" icon flashes. The current On or Off setting is displayed. Press the CHANNEL UP or CHANNEL DOWN button to select "Roger Channel Buttons Beep" On or Off. Press the MODE/LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for fifteen (15) seconds to enter the new setting and return to LISTENING MODE. The setting you select will be saved when you turn your radio off and on again. When the "Roger Beep" is On, the "Roger Beep" icon will be displayed. NOTE: The MODE/LOCK button has dual functions. Press and release to enter Mode Function. Press and hold to enter Lock Function. Listening Listening for a Response When You Have Finished Talking: 1. Release the TALK button to receive incoming transmissions. Your microTALK® is always in LISTENING MODE while the TALK or CALL buttons are not pressed. OPERATION Volume To Adjust the Volume: 1. Press the VOLUME UP or the VOLUME DOWN buttons. A triple beep sound is used to indicate that you have reached the minimum (1) or maximum (8) volume level. Call Button Volume Buttons English Volume Level Call Button To Alert Another Person That You Are Calling: 1. The other person will hear a two (2) second ringing tone. [. . . ] This declaration applies to all specimens manufactured in accordance with the attached technical documentation described in Annex II of the Directive which forms part of this declaration. Assessment of compliance of the product (class 2. 6) with the requirements relating to the essential requirements according to Article 3 R & TTE was based on Annex IV of Directive 1999/5/EC and the following standards: Radio Spectrum: EN 300 296-2 v. 1. 1. 1 (02/01) (Identification of regulations/standards) EMC: EN 301 489-5 (07/2000) (Identification of regulations/standards) Electrical Safety: EN 60065: 1998 (Identification of regulations/standards) RF Exposure: EN 50371: 2002 (Identification of regulations/standards) DUBLIN, IRELAND MIKE KAVANAGH English PA-BC1 Optional Accessories For accessory orders and availability, please contact your local dealer. . Rapid Wall Mount Charger (220 V, 2-pin CE plug and 240 V, 3-pin UK plug adapter) MA-SM . . VOX Headset Speaker/Microphone MA-EBM . [. . . ]