User manual COBRA MT 600UK QUICK START GUIDE

[. . . ] External Speaker/ Microphone/Charge Jack 3. Lock Tab 1 2 10 9 3 4 5 8 7 11 6 12 13 Printed in China Part No. 480-329-P Version C PRODUCT FEATURES · Two-Way Radio with up to a 5 km (3 mile) range · 8 Channels* · 38 CTCSS Privacy Codes · 83 DCS Privacy Codes · Backlit LCD Display · Battery Saver Circuitry · Maximum Range Extender · Call Alert (5 selectable tones) · Scan (Channel, Privacy Codes) · Vox Mode for Hands-Free Operation · Auto Squelch · Selectable On/Off "Roger Beep" Confirmation Tone · Key Lock · External Speaker/Microphone/Charge Jack · Belt Clip *You are not allowed to use channels 1 and 2 in France. This situation can change; please contact the French radio licensing authority for more information. Features English 1 2 3 4 11 5 6 7 9 8 10 1. [. . . ] Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected. Mode Button CTCSS OFF Select Privacy Code Channel Buttons MODE FUNCTIONS OPERATION DCS (Digital Coded Squelch) is an advanced digital coding system allowing you to select one of 83 privacy codes to reduce incoming transmissions from other users on the channel. NOTE: If you are using a DCS code, both radios must be turned to the same channel and DCS privacy code to communicate. Each channel will remember the last code you selected. After selecting a channel, press and release the MODE button until the DCS icon flashes on the display. In addition to the DCS icon, either OFF or the small numbers next to the channel number will flash on the display. If DCS and OFF are flashing, press the CHANNEL UP or CHANNEL DOWN button to exit OFF and proceed to select a privacy code; or, if DCS and the small numbers next to the channel number are flashing, press the CHANNEL UP or CHANNEL DOWN button to select a privacy code. When your desired privacy code is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. Mode Button Select VOX Channel Buttons English Mode Button DCS OFF DCS Privacy Codes Select Privacy Code Channel Buttons In VOX Mode, your microTALK® radio can be used "hands-free, " automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise. Press the MODE button until the VOX icon flashes on the display. The current On or Off setting is displayed. Press the CHANNEL UP or CHANNEL DOWN button to turn VOX On or Off. When your desired VOX Mode setting is displayed, choose one of the following: a. Press the MODE button to enter the new setting and proceed to other functions. Press the LOCK button to enter the new setting and return to LISTENING MODE. Do not press any buttons for 15 seconds to enter the new setting and return to LISTENING MODE. Voice Activated Transmit (VOX) MODE FUNCTIONS OPERATION Mode Button Select VOX Sensitivity Level Channel Buttons English To Set the VOX Sensitivity Level: 1. [. . . ] Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entererd Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission. MODE FUNCTIONS OPERATION You can choose between five (5) different call tones to transmit a unique call alert. Press the MODE button until the letter "C" is displayed. The current call tone number will be flashing on the display next to the "C. " The current call tone will sound for one (1) second. Press CHANNEL UP or CHANNEL DOWN button to hear the other call tone settings. [. . . ]