User manual COBRA MT 800 QUICK START GUIDE

[. . . ] External Speaker/ Microphone/Charge Jack 3. Lock Tab 1 2 CHRG 10 3 9 4 11 5 7 Printed in China Part No. 480-330-P Version C 8 12 6 13 Product Features · Two-Way Radio with up to a 5 km (3 mile) range 1 · 8 Channels* · 38 CTCSS Privacy Codes · 83 DCS Privacy Codes · Backlit LCD Display 14 · Battery Saver Circuitry · Maximum Range Extender · VOX Mode for Hands-Free Transmissions · Baby Monitor Function · Call Alert (10 Selectable Tones) · Scan (Channel, Privacy Code) 13 · Dual Watch Programmable 2-Location Scan · Key Lock · Auto Squelch · Selectable On/Off "Roger Beep" Confirmation Tone · Selectable On/Off Keystroke Tone · Combination Speaker/Microphone/Charging Jack · Belt Clip *You are not allowed to use channels 1 and 2 in France. This situation can change; please contact the French radio licensing authority for more information. [. . . ] While setting channel scan, if you do not press 2. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE. Press the MODE button to proceed to set privacy code on the channel that was either displayed before you entered Mode Functions on which, during scanning, you last received a transmission (see "CTCSS Privacy Code Scan" or "DCS Privacy Code Scan" for further details). MODE FUNCTIONS OPERATION c. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel on which, during scanning, you last transmitted or received. English If you do not press any button within 10 seconds, your radio will automatically resume scanning CTCSS privacy codes. During Scanning (while not receiving a transmission), You Can Choose From The Following: a. Press and hold the TALK button to communicate on either the channel or channel/privacy code that was displayed before you entered Mode Functions or channel/privacy code on which, during scanning, you last received a transmission. This will return the radio to LISTENING MODE. Press the MODE button to proceed to next available Mode Function. Press the LOCK button to return to LISTENING MODE on either the channel or channel/privacy code that was displayed before you entered Mode Functions or the channel/privacy code on which, during scanning, you last received a transmission. CTCSS Privacy Code Scan Your microTALK® radio can automatically scan the CTCSS privacy codes (01 to 38) within one (1) channel. While in LISTENING MODE, Select Channel press the CHANNEL UP or CHANNEL DOWN button to choose the channel on which you wish to scan the Mode Button CTCSS privacy codes. Press the MODE button until the Scan icon and the small numbers next to the channel number flash on Select Scan Privacy the display. Press the CHANNEL UP or CHANNEL DOWN button to begin scanning CTCSS privacy codes within the Channel Buttons channel you selected. DCS Privacy Code Scan You can automatically scan the DCS privacy codes (01 to 83) within one channel. The Scan icon will continue to be displayed when CTCSS privacy code scan is On. Your radio will continue to scan CTCSS privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds. While setting CTCSS privacy code scan, if you do not press any buttons for 15 seconds your radio will automatically return to LISTENING MODE on the channel/privacy code that was displayed before you entered Mode Functions. During An Incoming Transmission, You Can Choose From The Following: a. Press and hold the TALK button to communicate on that channel/privacy code. Your radio will remain on that channel/privacy code and return to LISTENING MODE. Press the CHANNEL UP or CHANNEL DOWN button to resume scanning CTCSS privacy codes. If you press the TALK button while scanning and not within 10 seconds of receiving a transmission, you will transmit on the channel/privacy code on which you last received a transmission. This will return the radio to LISTENING MODE. To Scan DCS Privacy Codes: 1. [. . . ] The setting you select will be saved when you turn your radio off and on again. When the "Roger Beep" is On, the "Roger Beep" icon will be displayed. 10 Call Tone Settings You can choose between 10 different call tone settings to transmit a unique Mode Button call alert. Press the MODE button until the letter "C" and the Call Tone Setting current call tone number (1 to 10) is displayed. The current call tone will sound for two (2) seconds. [. . . ]