User manual COEF PERFORMANCE250 DV DVP SERVICE MANUAL

[. . . ] SERVICE MANUAL MODE PERFORMANCE250 DV/DVP CODE CODE ZL-012601-01 ZL-012701-01 Address:Via Svizzera, 12/14, Castel Goffredo Mantova 46042 Italy Website: www. coef. it INDEX COVER-------------------------------------------------------------------------------------------------. 1 INDEX--------------------------------------------------------------------------------------------------. 2 1. 0 SPECIFICATIONS---------------------------------------------------------------------3 2. 0 CHANNELS AND DIGITAL VALUES---------------------------------------------4 3. 0 ASSEMBLY SKETCH AND PART LIST--------------------------------------------6 4. 0 WIRE CONNECT DIAGRAM-------------------------------------------------------9 5. 0 PCB COMPONENT LOCATION DRAWING------------------------------------10 6. 0 ELECTRONIC MAINTENANCE--------------------------------------------------11 7. 0 ORDINARY MAINTENANCE-----------------------------------------------------12 8. 0 EXTRAORDINARY MAINTENANCE-----------------------------------------12 9. 0 TROUBLE SHOOTING------------------------------------------------------------. 13 COSTOMER SUPPORT REQUEST FORM-------------------------------------15 2 1. 0 SPECIFICTION ZL-012701-01 ZL-012601-01 3 2. 0 CHANNELS AND DIGITAL VALUES next 4 continue 5 3. 0 ASSEMBLY SKETCH AND PARTS LIST 1 13 5 3 1 6 14 8 11 12 9 10 2 7 4 R/N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 P/N 126-0326000000 022-1014022254 119-2523000600 013-4000412505 088-5001063400 370-5012301033 083-0230000000 088-5012601538 619-0126010000 605-0000000019 626-0126010000 575-1009061900 066-1080000000 626-0127012000 PART NAME lampholder transformer ballast capacitor ignitor elliptic reflector fan main pcb loaded objective lens assembly step motor mirror assembly focus adjustment thermal switch anti-heat filter(DV only) 6 DESCRIPTION GY9. 5 L=400mm 100V-250V2*(28V 2A) 12V 1. 8A 230VAC50/60HZ 3A 40 F 250V 4-5KV, 5A HQCD-7 85. 8* 26*44. 3 119*119mm 230VAC/50/60HZ 261× 141mm 75 400° QUA 1 1 1 1 1 1 1 1 1 5 125x175x1. 2 , R62. 5 9*61mm 80 153. 5*80 1 3 1 1 3. 1 ASSEMBLY SKETCH AND PARTS LIST (DVP ONLY) 4 1 4 6 5 2 3 4 5 7 8 4 9 3 12 10 6 Part list R/N 1 2 3 4 5 6 7 8 9 10 P/N 852-0740003500 622-0126010000 605-0000000023 088-5020600490 618-0126010000 616-0126010000 852-0580003500 610-5012301000 611-0126010000 624-5012601000 PART NAME OR-ring prism wheel assembly step motor optical sensor pcb assembly gobos wheel assembly focus lens assembly OR-ring shutter/strobe/dimmer blade color wheel assembly anti-heat filter assembly 7 DESCRIPTION 3. 53 151 MH17HN201-20 26. 7*26. 76mm 152 49. 8 1120° 3. 53 0. 5mm 138 70*164*1. 2 74 57 QUA 1 1 2 4 1 1 1 2 1 1 3. 2 ASSEMBLY SKETCH AND PARTS LIST (DV ONLY) 2 Part list R/N 1 2 3 4 5 6 7 P/N 088-5020600490 605-0000000023 616-0126010000 618-0126010000 611-5012301000 PART NAME optical sensor pcb loaded step motor focus adjustment assembly gobo wheel assembly color wheel assembly DESCRIPTION 26. 7*26. 76mm QUA 4 2 49. 8 1120° 152 138 11PCS 28 3. 53 74 1 1 1 1 1 626-0127011000 shutter/strobe blade assembly 852-0580003500 OR-ring 8 4. 0 WIRE CONNECT DIAGRAM 9 5. 0 PCB COMPONENT LOCATION DRAWING 10 6. 0 ELECTRONIC MAINTAENCE This section is dedicated in detail to the electronic connection between the card and the mechanical components, assembled in the projector . These informations will be absolutely necessary when the mechanical unit has to be removed from the projector for maintence and/or repair. [. . . ] The sensors are absolutely necessary when a general reset of the projector is needed. If this function is not correctly executed, it will totally compromise the regular working of the projector, at least for the group referred to the sensor itself. The same situation eill occur in the case of the gobos wheel or the effects wheel. The section shutter/strobe/dimmer does not use sensors during the reset positioning but it is conditioned by a mechanical beat of the shutter shovels. You must carefully clean also the moving zoom lens. After several working hours dust and grease will be stored on this lens, carried inside the projector by air flow. 12 9. 0 PROBLEM The Projector doesn t switch on TROUBLE SHOOTING CAUSE ACTION Check if the luminous indicator is lighted or not. Just to wait for little of time Make sure that the projector is correctly configurated. Replace or repair the DMX CABLE Check the control unit by means of other working projectors Technical aid is required. [. . . ] Company name: Contact person : fax: tel: e-mail Product indentification Product name code number ( * ) serial number Time in use before fault: Date of shipment to distributor: Date of shipment to end user: Operating conditions: Mains supply voltage(volt): Ambient temperature(¢J : ) Lamp type and manufacturer Used in: disc, theatre, rental, main supply frequency(hertz): Operating position: other Detailed description of product problem/requirement [. . . ]