User manual COMCAST ON DEMAND

[. . . ] When controlling a DVD player, use CH+ (or CH-) to skip forward (or skip reverse) through video. Use the keypad (0 ~ 9) to directly select the channels (e. g. , 09 or 031). In the TV mode, use this key to switch the TV's input to view TV or video programs. In the AUX mode, use this key to switch the VCR, PVR (or DVR), or DVD player to view TV or video. [. . . ] Brands are listed in alphabetical order with the most popular codes listed first. Enter the first four-digit code for your device. If you perform this procedure correctly, the selected mode key will blink twice. NOTE: If you enter an invalid code, the selected mode key will display one long blink and exit the programming mode. Repeat steps 2 to 5 with a valid code. 5. 6. 4. Press Setup once to lock in the code. The TV key will blink twice. To search for the codes of another device, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are searching for. SOLUTION: An invalid entry has occurred. Check the key to be entered and try programming again. PROBLEM: A mode key blinks when you press a key, but home entertainment component does not respond. User Guide Fold 2. 4. OVERVIEW The Comcast Custom 3-Device universal remote will control up to three home entertainment devices, including a Cable Box (used by Comcast Systems), a TV, a VCR, an Audio Amplifier or Receiver, a DVD player, or a PVR. The remote control requires installing two (2) new AA batteries (included) and some easy programming to control your devices. For best results, please read and perform all instructions listed here. Also, keep this guide for future reference. In the AUX or TV mode, use the transport keys to control a VCR, PVR, or DVD player. To record a program on a VCR, press REC twice. In the Cable mode, use the keys to control ON DEMAND programs. Use A, B, or C to access interactive program guide functions on your Scientific Atlanta Explorer, Pioneer Voyager, or Pace Cable Box. Use Lock to restrict viewing of selected programs (Parental Control) on your Motorola (GI or Jerrold) Cable Box. Use PPV to access information on available Pay-Per-View movies and events on your Motorola (GI or Jerrold) Cable Box. Use Page+ (or Page-) to page up (or down) through menu screens and the interactive program guide. Use Guide to display the interactive program guide. 5. Unlocking Volume Control For A Single Device (Individual Volume Unlock): 1. Press a desired mode key where you want volume to be unlocked (e. g. , AUX) and controlled within its own mode. Press and hold Setup until the selected mode key blinks twice, then release Setup. The mode key will blink four times confirming unlock. If desired, repeat steps 1 to 3 (of this section) for each device that you want volume to be unlocked. [. . . ] Repeat steps 1 to 7 for another device you want to control. 2. 2. 3. NOTE: When batteries need replacement, the remote control will stop operating. Remove the old batteries and insert new ones within 10 minutes to ensure all of your programming information is restored. Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. [. . . ]