User manual COMET LABS CAR-R300

[. . . ] Internet IR Camera User's Manual Internet IR Camera User's Manual Software Version 2. 0. 3 1/78 Internet IR Camera User's Manual Internet IR Camera / Video Server Series Owner's Record The model and serial numbers are located at the bottom. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your dealer regarding this product. ____________________ To prevent fire or shock hazard, do not expose the unit to rain or moisture when rear cover be removed. [. . . ] If your enable motion detection, you can also setup detection sensitivity from one of three sensitivity levels. By dragging mouse position on the image, you can see a red-box area which is the motion detection area according to your sensitivity. 39/78 Internet IR Camera User's Manual Time Setting: Setup the Internet Camera time configuration You can setup the Internet Camera time or make it synchronized with PC or remote server. Also, you may select your time zone in order to synchronize time locally. Synchronize the time with PC's time: This is the default time adjust mode, the check box of "Synchronize with PC's time" would be checked by default. Press "SAVE" button to do the time synchronization with PC time. After the "SAVE" button was set, the Internet Camera time will be synchronized as PC's time. From the setting, the Server's time is the same as PC's time. Change the time manually: The following steps can change the time manually 1. Select the check box of "User Input" 2. Change the date according to the "yyyy/mm/dd" format. Change the time according to the "hh:mm:ss" by 24 hours format. Select the "Adjust" button to adjust the time. The time was changed by checking the "Server: " time field. 40/78 Internet IR Camera User's Manual Get Time from a NTP server: Select "NTP" Button Key in the NTP server's IP address. After the Internet Camera gets the time from NTP server, it will update the Internet Camera's time field. 41/78 Internet IR Camera User's Manual Popup: Setup event message while motion or sensors has been activated When any one of alarms enabled, and one of them detected, then a message window will be displayed on the screen. You can have output message in case of events activated such as sensors or motion detection to warn user. 42/78 Internet IR Camera User's Manual Firmware upgrade: The Internet Camera supports firmware upgrades (the software that controls the operation in the Internet Camera). COMET LABS will supply the latest firmware version on the COMET LABS Web site at: www. cometlabs. com Download the latest firmware file from COMET LABS's website. Unzip this firmware file to binary file and store it into your PC. The file name should be RZ. BIN or similar for the Internet Camera. Then follow the steps as bellows carefully: 1. Close all other application programs which are not necessary for firmware update. Set the video resolution to 176 x 144 or smaller. The Firmware Upgrade menu will appear: 8. (It must be make sure that the Firmware only apply to 43/78 Internet IR Camera User's Manual Internet Camera, once update, it will be burned into FLASH ROM of system. ) 9. Once the firmware file was selected, select "Upload". 10. [. . . ] As to the users that could obtain the static valid IP address, they do not usually have to apply the DDNS service. Before we decide if DDNS is necessary for the users, we have to check what kind of Ethernet network environment we have to install our Internet Camera. (1) Environment of Fixed Valid IP Network If users could obtain valid IP addresses, they could save the effort to apply DDNS service. Because the IP address in this environment is fixed, users could input the IP address or domain name of demo site directly in the IE browser. (2) Environment of Dynamic IP Network If user is under an environment of dynamic IP network (Dial-up ADSL), they have to apply a domain name in advance. Finally setup the necessary information of DDNS and PPPoE of the Internet Camera in order to let the outside administrator be able to access through Internet. 74/78 Internet IR Camera User's Manual 3. [. . . ]