User manual COMPAQ MD5020N

[. . . ] HP Pavilion md5020n/md5820n/md5880n/md6580n High-Definition Microdisplay TV User's Guide © Copyright 2005 Hewlett-Packard Development Company, L. P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. [. . . ] If you forget the password, see "General Problems" on page 64. Setting Permission Levels By using the standard ratings associated with many TV shows and movies, the TV can block the types of content you do not want to view. By setting a lock at a certain TV or movie rating, you block shows or movies that exceed that rating. TIP: If you want to watch a blocked program, you can temporarily suspend the parental controls if you know the password. See "Temporarily Suspending Controls" on page 48. Setting a simple lock The simplest way to block unwanted shows and movies is to choose one of the predefined rating levels. Press Settings, go to Lock, and press OK. If no password is set, when prompted, press a sequence of four 0 through 9 buttons to create a new password. When prompted, press the same buttons again. If a password is set, when prompted, press the buttons for your password. Go to Lock > Lock mode; then select On and press OK. Go to Lock > Rating; then select one of the predefined modes and press OK. Blocks these ratings. . . US: TV-Y7 and above, PG and above Canada: C8+ and above, 8+ and above US: TV-PG and above, PG-13 and above Canada: 14+ and above, 13+ and above US: TV-MA and above, R and above Canada: 18+ and above See "Setting individual controls" below. 3. Adult (age 16) Custom 5. Go to Lock > Unrated content, lock or unlock this option, and then press OK. Note that many news, sports, and general interest programs are not rated. Setting individual controls If you change individual lock settings, these settings become the Custom lock mode. Press Settings, go to Lock, and press OK. If no password is set, when prompted, press a sequence of four 0 through 9 buttons for the new password. When prompted, press the same buttons again. If a password is set, when prompted, press the buttons for your password. Go to Lock > Lock mode, and then select On and press OK. For each type of content, set the individual locks according to the ratings you want to block. Press OK to lock or unlock a rating level. Some locks change automatically when you lock or unlock another rating. Go to Lock > Unrated content, lock or unlock this option, and then press OK. [. . . ] Be aware that the beam is invisible light and cannot be seen. Do not attempt to view the infrared LED beam with any type of optical device. Mercury Safety WARNING!This TV lamp contains a small amount of mercury. If the lamp breaks, adequately ventilate the area where the breakage occurred, discard any nearby food and drink, and thoroughly clean the table surface around the TV. [. . . ]