User manual COMPRO V150 START UP GUIDE

[. . . ] Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. Other names and marks are trademarks of their respective owners. COMPRO makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. [. . . ] Order of the Sources: TV AV (Composite) S-Video FM TV. . . VideoMate V150/V150F TV Box supports 60 and 75 Hz with 9 resolutions from below. Resolution 1 -> 640*480 (4:3) Resolution 2 -> 800*600 (4:3) Resolution 3 -> 1024*768 (4:3) Resolution 4 -> 1280*720 (16:9) Resolution 5 -> 1280*1024 (5:4) Resolution 6 -> 1400*1050 (4:3) Resolution 7 -> 1440*900 (16:10) To change resolution, please open up menu and select the resolution you want. Refer to later instruction for more detail. "Resolution" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 640 x 480 800 x 600 1024 x 768 1152 x 864 1280 x 1024 1280 x 720 1440 x 900 1400 x 1050 60 Hz Yes Yes Yes Yes Yes Yes Yes Yes Support Refresh Rate 70 Hz 72 Hz Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 75 Hz Yes Yes Yes Yes Yes Yes Yes Yes 9 OSD Menu Guide Menu button will open up OSD Menu, please use the direction key to navigate. (Picture) Brightness Contrast Saturation Sharpness Hue OptiColor Mode (TV) (Monitor) (OSD) (Sound) Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Sharpness (0~15) Adjust the Hue ( 0~100) 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode. (Picture) Input Signal Channel Rename Fine tune Auto Scan Channel Swap CH Add/Erase Channel Video System (TV) (Monitor) (OSD) (Sound) Select Air or Cable for TV input signal type. Default is Air Set a name for specific channel. (5 letter/numbers) Fine tune frequency if TV is unclear. (0~100) default is 50 Recommend to use Auto Scan for the first time. (NO/YES) Swap the channel numbers to your preference. (Default: Add) Change video standard for current channel. (Only appears in countries with 2 or multiple TV systems) FM Mode: While listen to FM radio, this OSD page will different with TV mode. (Picture) Auto Scan (FM) (Monitor) (OSD) (Sound) Recommend to use Auto Scan for the first time. (NO/YES) Directly input the channel frequency you want to listen. And Enter Frequency you can use the CH Add/Erase to save it. (Default: Add) Channel Set a name for specific channel. (5 letter/numbers) Rename 10 (Picture) Resolution Refresh Rate Noise Reduction OptiRatio Display Type Input Source (TV) 640*480 1280*1024 (Monitor) 800*600 1400*1050 (OSD) (Sound) 1024*768 (default) 1280*720 1440*900 60Hz (default) 75Hz Adjust level of noise reduction. (0~8) Default is 4 4:3 16:9 SmartZoom Panorama Full LCD (default) CRT PDP TV AV (Composite) S-Video FM PC Use right and left direction key to adjust the position of Position Finetune screen (Picture) (TV) (Monitor) (OSD) (Sound) OSD Position Use direction keys to move OSD position OSDTransparency 1 2 3 4 Language Select your language (Default is your local country) Information VideoMate V150F/V150 Version information Reset All Settings NO/YES (1 Cancel / 2 Reset All Settings) Country/Region Select your country or region (Picture) Volume Treble Bass Dynamic Bass Boost Stereo Effect SAP Mode Reset (TV) (Monitor) (OSD) (Sound) Adjust volume (0-50) Adjust Treble volume (0-15) Adjust Bass volume (0-15) ON/OFF (Default is OFF) Adjust Stereo Effect (0~8) Default : 0 ON/OFF (Default is OFF) (Only appears in PAL/SECAM TV system area) Reset sound settings (NO/YES) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select YES, and it will show as a sub menu. Once you have entered this menu, you will see a list of channels. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing 11 pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. [. . . ] This problem could also come from with static. Once you connect the cable to our TV card, the static interfere the system. It's possible to correct this problem by connecting a wire from the grounding of the cable to ground. Also make sure computer grounding is good. Why PIP does not work? Please make sure you have connected your computer VGA to V150/V150F and connect V150/V150F to the monitor. [. . . ]