User manual COMPRO W700 START UP GUIDE

[. . . ] Compro, VideoMate, Poladyne, Play with Power, and the Compro logo are trademarks of Compro Technology, Inc. Other names and marks are trademarks of their respective owners. COMPRO makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any particular purpose. The information in this document is subject to change without notice. [. . . ] Order of the Sources: Analog TV Composite video S-Video Conponent video . . . VideoMate W700 TV Box supports 60 and 75 Hz with 9 resolutions from below. Resolution 1 -> 800*600 (4:3) Resolution 2 -> 1024*768 (4:3) Resolution 3 -> 1280*1024 (5:4) Resolution 4 -> 1400*1050 (4:3) Resolution 5 -> 1440*900 (16:10) Resolution 6 -> 1600*1200 (4:3) Resolution 7 -> 1680*1050 (16:10) Resolution 8 -> 1920*1080 (16:9) Resolution 9 -> 1920*1200 (16:10) To change resolution, please open up menu and select the resolution you want. Refer to later instruction for more detail. "Resolution" button from the remote controller can also switch the resolution. If using PIP feature, the refresh rates in Windows support resolutions below: Resolution 800 x 600 1024 x 768 1280 x 1024 1440 x 900 1400 x 1050 1600 x 1200 1680 x 1050 1920 x 1080 1920 x 1200 Support Refresh Rate 60 Hz 75 Hz Yes Yes Yes Yes Yes No Yes No Yes No Yes No Yes No No No No No OSD Menu Guide Menu button will open up OSD Menu, please use the direction key to navigate. Picture Brightness Contrast Saturation Hue Sharpness OptiMode Adjust the brightness (0~100) Adjust the Contrast (0~100) Adjust the Saturation (0~100) Adjust the Hue ( 0~100) Adjust the Sharpness (0~15) 3 preset modes (Standard/TV, Game, and Cinema) and 5 custom modes of picture settings. You can adjust the color settings then save it in custom mode. TV Function Input Signal Channel Video System Auto Scan Channal Edit Finetune Select Air or Cable for TV input signal type. Change video standard for current channel. (Only appears in countries with 2 or multiple TV systems) Recommend to use Auto Scan for the first time. (NO/YES) Advanced channel edit in TV Fine tune frequency if TV is unclear. (0~100) default is 50 Channel Rename Set a name for specific channel. (5 letter/numbers) Custom Channel CH. . . . . . . . Add and edit your custom channel Resolution Resolution Swtich resolution: 800x600 1024x768 (default) 1280x1024 1440x1050 1400x900 1680x1050 1600x1200 1920x1080 1920 x1200 Adjust level of noise reduction. (0~8) 4:3 16:9 SmartZoom Default is 4 Full Panorama Noise Reduction OptiRatio Input Source Analog TV, Composite, S-Video , Component Position Finetune Use right and left direction key to adjust the position of screen 10 OSD Settings Country/Region Language OSD Position Information Reset all settings Select your country or region Select your language YES/NO (Default is NO) VideoMate W700 Version information NO/YES (1 Cancel / 2 Reset All Settings) OSD Transparency 0~100 Audio Settings Volume Adjust volume (0-100) Channel Swap To swap the channel numbers, please select Channel Swap from the menu then select YES, and it will show as a sub menu. Once you have entered this menu, you will see a list of channels. You may browse with the direction keys; Up and Down are going through the list while Left and Right are changing pages of the list. Select the channel number that you wish to swap and press OK, and then enter the number of the channel that you wish to switch. To reset to the original channel numbers, please rescan the channel table again by selecting Auto Scan in the menu. My Favorite Channel List My favorite channel list can store up to 9 channels that you watch the most and browse with "Fav. To add channels to the favorite list, please turn to the channel you wish to add and press "Set Fav" on the remote control. Press "OK" on the selected position. PIP (Picture In Picture) You can start PIP function by clicking "PIP" button on the remote control. It allows you to watch TV on the Windows desktop. [. . . ] Please directly key-in the missing channel number by remote number pad. Press "Menu" key to open the OSD menu. Select the "TV" setting tab (the second from left). Select "CH Add/Erase", and then pick "Yes" to add channel. [. . . ]