User manual COMPX C4198

[. . . ] • Depois de o ler, guarde-o num local conveniente para fácil consulta. Authorized representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany 85464609111001 Printed in Japan EN FR DE IT PT ES • Tras leerlo, almacénelo en un lugar accesible para facilitar su consulta. CV6233219387 Operation Manual Air Conditioning Intelligent Management System CZ-CSWKC2 Basic Software Thank you for purchasing our monitoring and control system. Before using the system, be sure to read this manual carefully. After reading it, store it, in a convenient location for easy reference. Contents Precautions on Using This Product. . . . . . . . . . . . . . . . . . . . . . . . 1. Features of the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Either the button or the button will always be selected. 4-11-2-2. Refining the displayed data When the button has been pressed, only alarms which have occurred historically are displayed. Click on the button again to return the button to its unpressed state. When the button has been pressed, only alarms which have been confirmed historically are displayed. Click on the button again to return the button to its un-pressed state. * These two buttons can be used in combination. For example, if both the and the buttons are pressed, the display is limited to current alarms that are unknown. Selecting the indoor unit to display refines the display to cover only that indoor unit. Click on the button on the right of the indoor unit display column, to display the list of registered indoor units. History is displayed for the selected indoor unit. The and buttons can be used together to display only alarms for the selected indoor unit, or only unconfirmed alarms. * Select the blank at the top of the list to return to display of all logs. * When this screen is displayed again from another screen, it automatically reverts to displaying all items. 4-11-2-3. Display range term specification method button to display the Term Setting screen. Click on the Click on the button on the right of the date display space to display the calendar. Click on the calendar dates to select the term of history items to display. The display term can be specified in order to check the presetting status, the working status of a device relative to its schedule, or other information. Display term setting Sort display Floor selection :Use to select the dates to display. Key · Address :Displays the addresses of indoor units. · Name :Displays the names of the indoor units. U Auto cool, Auto heat: green, Cool: blue, Heat: red, Fan: gray, Dry: pink The schedule graph display is displayed in black if it is only showing On/Off schedules. * If a communications error occurs during operation, operation is displayed as the last mode used. * Use the “Schedule” – “Schedule operation time settings” screen to set schedule times. * Use the “Schedule” – “Mode settings (Calendar)” screen to set schedule modes. 37 4-12-1. 4-12-1-1. Display method Selecting displayed floor and area If the floor and area is “All Floor”, all registered indoor units are displayed. Click on the button on the right edge of the floor selection list to display a list of registered floors and areas. From the list, select the floor or area to monitor. A list of indoor units registered within that floor and area is displayed. 4-12-1-2. Click on the Sort button to change the display order of a list. The currently pressed button is the one which determines the sort order. Sort lists Click on the buttons to change the list orders. [. . . ] 10. From now on, you can start the P-AIMS system by double-clicking this shortcut. 90 8. Troubleshooting Symptom There is no screen display, even when the PC is switched on. Scheduled operation does not work well. Before requesting service, check the following items. Do not attempt to service the system yourself. Cause · Is the power cord connected? [. . . ]