User manual COMPX C8140

[. . . ] Multi air conditioner system Indoor units Multi air conditioner systems save space by letting you connect multiple indoor units to a single outdoor unit. The priority of operation is placed on the first unit that turned on. € During operation, HEAT and COOL modes cannot activate at the same time for different indoor units. € The power indicator blinks to indicate the indoor unit is standing by for a different operation mode. [. . . ] Water may enter the unit and degrade the insulation. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. English Safety precautions Remote control Do not use rechargeable (Ni-Cd) batteries. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. € New batteries of the same type must be inserted following the polarity stated. CAUTION Indoor unit and outdoor unit Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Power supply Do not disconnect the plug by pulling the cord to prevent electric shock. 5 How to use POWER TIMER AUTO COMFORT NANOE-G POWERFUL QUIET Single Multi Single split system Multi split system (Green) ECONAVI (Orange) (Green) (Blue) (Orange) (Orange) (Green) Indicator To optimise energy saving MODE To select operation mode AUTO - For your convenience HEAT - To enjoy warm air COOL - To enjoy cool air DRY - To dehumidify the environment MILD DRY COOLING Remote control display Human activity sensor Sunlight sensor and remote control receiver To improve humidity and moisture level • This operation reduces air dryness and provides you with a comfortable living environment during COOL mode only. € When vertical airflow direction is set to AUTO, it stops at lower position to avoid cold air contact. Note ECONAVI POWERFUL/ QUIET AUTO COMFORT NANOE-G ECONAVI POWERFUL/ QUIET AUTO COMFORT , , , • Can be activated in all modes and can be cancelled by pressing the respective button again. How to use • Can be activated even when the unit is turned off. In this condition, the unit will operate as a fan with AUTO fan speed and louver swing. € This operation cannot be performed or Multi will be stopped if other indoor unit is activating HEAT mode. OFF CANCEL AC C 1 Select ON or OFF timer • Each time pressed: Example: OFF at 22:00 English • nanoe-G starts automatically when the unit is turned on with OFF/ON . Operation mode Single Multi Single split system Multi split system AUTO : During operation mode selection the POWER indicator blinks. Single • Unit selects operation mode every 10 minutes according to setting temperature and room temperature. € Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and room temperature. The POWER indicator blinks during this operation. COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode. DRY : Unit operates at low fan speed to give a gentle cooling operation. [. . . ] € Certain fluorescent lights may interfere with signal transmitter. NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY AND UNPLUG then please consult authorised dealer under the following conditions: • Abnormal noise during operation. € Water/foreign particles have entered the remote control. The unit stops and the TIMER indicator blinks. [. . . ]