User manual COMPX C8414

[. . . ] This symbol refers to a hazard or unsafe practice which can result in personal injury or product or property damage. CAUTION 2 C8414_all. indb 2 2011/09/07 14:37:46 Installation Location • We recommend that this system controller be installed properly by qualifi ed installation technicians in accordance with the Installation Instructions provided with the system controller. WARNING • Do not install this system controller where there are fumes or flammable gases, or in an extremely humid space such as a greenhouse. Do not install the system controller where excessively high heatgenerating objects are placed. • Electrical Requirements 1. All wiring must conform to the local electrical codes. [. . . ] Do not cool or heat the room too much if babies or invalids are present. EN CAUTION • • • • 3 C8414_all. indb 3 2011/09/07 14:37:46 How to Use the System Controller Functions of buttons A: ALL/ZONE/GR SELECT button B: ZONE select button C: GROUP select button F: Operation lamp D: ON button E: OFF button G: MODE button H: Temperature setting buttons O: VENTILATION button K: CHECK button M: SET button N: CL button L: CENTRAL CTRL button I: FAN SPEED button J: FLAP button A: ALL/ZONE/GR SELECT button Use this button to select one of the following: ALL: ZONE: Used for turning all the air conditioners on and off. Used for turning all the air conditioners of each zone on and off. GROUP: Used for turning all the air conditioners of each group on and (GR) off. A maximum of four zones and 16 groups (units) in a zone can be set. Use this button to select a zone (1 to 4) to operate individually. Use these buttons to select a group (1 to 16) to operate individually. NOTE B: ZONE select button C: GROUP select buttons 4 C8414_all. indb 4 2011/09/07 14:37:46 Functions of buttons (Continued) D: ON button E: OFF button F: Operation lamp G: MODE button (AUTO) This button is for turning the selected air conditioner on. This button is for turning the selected air conditioner off. This lamp lights when the unit is turned on. Use this button to select one of the following five operations: : Used to automatically set cooling or heating operation. Only for heat pump type (temperature range: 17 to 27 °C) : Used for normal heating operation. Only for heat pump type (temperature range: 16 to 26 °C) : Used for dehumidifying without changing the room temperature. (temperature range: 18 to 30 °C) : Used for normal cooling operation. Use this button to reset the filter sign . The air conditioner has the timer for the filter and informs you when the filter needs cleaning. O: VENTILATION button Use this button when you installed a fan available in the market. Pressing this button turns on and off the fan. When turning off the air conditioner, the fan will also turned off. While the fan is operating, If installed. is displayed when pressing the ventilation button, no fans are 6 C8414_all. indb 6 2011/09/07 14:37:49 Display Description A: When the unit is in the heating standby mode, the B: The currently selected operation mode is displayed. C: The currently selected FAN SPEED, Airflow Direction and SWEEP settings are displayed. D: This indication appears when the filter needs cleaning. E: This indication appears only when an abnormality occurs within a unit. F: The currently selected mode (ALL, ZONE or GROUP), ZONE number and GROUP number are displayed. GROUP number display (no figure: no number registered) GROUP state display ( [ ] registered group, Operation state display ( on, no sign: off, currently selected group) alarm) indicator appears. EN G: The currently selected central control mode (1, 2, 3 or 4) is displayed. [. . . ] Central 2: Individual ON/OFF, MODE, and Temp, setting operations with the remote controller are inhibited. Central 3: Individual MODE and Temp, setting operations with the remote controller are inhibited. Central 4: Individual MODE operation with the remote controller is inhibited. • Under Central/Individual settings other than listed above, “CENTRAL” is displayed. [. . . ]