User manual CONCORD 170BV

[. . . ] · Protect those parts of the CONCORD TRANSFORMER that are not covered in fabric from direct sunlight to avoid your child being burned. · The child restraint system must not be damaged or trapped by moving parts in the car interior or by doors. · Never modify the CONCORD TRANSFORMER in any way ­ this will endanger your child's safety. 29 28 · After an accident the CONCORD TRANSFORMER must be replaced or returned to the manufacturer for testing, along with a report of the accident. [. . . ] Belts must not be routed in any other way. If the car seat used has a front airbag, we recommend positioning the car seat as far back as possible. For cars with front and side airbags, the instructions in the car's operating manual must also be observed. The car's shoulder/diagonal belt must pass forwards from the vehicle bracket to the shoulder belt guide (07). Adjust the car seat position if necessary. 31 _USINGTHECONCORDTRANSFORMER You have decided to purchase our CONCORD TRANSFORMER seat for the safety of your child. This product is manufactured under strict quality controls. It can only effectuate its maximum safety properties if it is used properly. The cover is an important component and contributes to the seat's effectiveness; for this reason the seat must only be used with its original cover!You should therefore ensure that you follow the instructions for fitting and use carefully. The seat may be used on any seat in your car that is fitted with a three-point seat belt. Statistics suggest that the place behind the passenger seat is the safest in the car. _INSTALLINGTHECONCORDTRANSFORMER Place the CONCORD TRANSFORMER on the car seat or bench seat, facing in the direction of travel. Now press the size adjustment button (05) on the back of the backrest and keep it pressed whilst moving the head section (01) into the required position. The CONCORD TRANSFORMER can be continuously adjusted to the right size and is locked into the current position when the adjustment button (05) is released. Make sure the belt passes inside the securing hook. The shoulder belt guide (07) should be slightly above the top of the child`s shoulder. At the same time, the shoulder belt should pass centrally between the child`s neck and the outer edge of the shoulder. 39 38 Pull the belt taut so that the lap belt and diagonal belt are well positioned and ensure that the belts are not twisted. The lap belt should be in the lowest possible position. If your vehicle is fitted with a seat belt height adjuster, adjust its height accordingly. When you wish to release the child from the seat, all you need to do is open the lock and pass the strap back across the child. To remove the shoulder belt from the guide, press the shoulder belt locking button (06) and pull the belt forwards and out. It is important to ensure that the belts are always correctly positioned each time the seat is used. If in doubt about any aspect of fitting, check with CONCORD. The belts must pass through the guides marked in red on the seat. [. . . ] · This child restraint system has been classified as being of the "universal" class, satisfying stricter conditions than previous models which do not bear this label. · If in doubt, please consult the manufacturer of the child restraint system or the retailer. · Only suitable for vehicles with three-point (lap and diagonal) seat belts tested and approved in accordance with ECE Regulation 16 or a comparable standard. 42 · When they come into contact with moisture, especially during washing, the cover fabrics may fade slightly. · Do not use solvents! 43 _GUARANTEE The guarantee begins on the day of purchase. [. . . ]