User manual CONCORD 3340Z

[. . . ] User's Guide www. concord-camera. com ENGLISH CONGRATULATIONS Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it. This manual has been written and formatted with depth and detail so that you can easily follow the instructions to maximize the features of your camera. 1 CAMERA OVERVIEW CAMERA OVERVIEW Top/Front 1 2 3 7 8 4 9 10 11 5 6 1. [. . . ] Press the joystick to highlight the hour (HH), minutes (MM) or AM/PM. · The selection will blink when it is highlighted. Press the joystick to change the data in the blinking position until you reach the desired setting. Press OK to set. ADJUST TIME 01 :01 AM RETURN OK SET Note: · The time can be displayed in a 12-hour or 24-hour respectively format. · If the battery is removed for more than 4 minutes, the time will return to its default setting. will appear on the LCD when the camera is turned on. Press the Shutter button slightly to turn the reminder off. 37 CUSTOMIZING THE CAMERA SETTINGS SETTING THE LCD BRIGHTNESS CAMERA MODE White Balance + EV Compensatiion ­ Setup 1 SETUP LCD Brightness Card Format Camera Info Adjust Date Adjust Time RETURN SELECT LCD BRIGHTNESS ­ OK SET + RETURN SELECT How to set the LCD Brightness: 1. In the Setup menu, press the joystick until LCD Brightness is highlighted. Press the joystick to display the LCD Brightness bar on the LCD. Press the joystick / to adjust the brightness. · The camera will return to picture taking mode or review mode. FORMATTING THE INTERNAL MEMORY OR MEMORY CARD CAUTION: ! 1. Formatting deletes all pictures and video clips from the internal memory or memory card. Removing the card during formatting may damage the card. Selecting the formatting feature while there is no memory card in the camera, will cause the internal memory to format. All pictures and video clips on the internal memory will be lost. SETUP LCD Brightness Card Format Camera Info Adjust Date Adjust Time RETURN SELECT Yes No CAMERA MODE White Balance + EV Compensatiion ­ Setup 1 CARD FORMAT RETURN SELECT RETURN OK SET 1. 4. In the Setup menu, press the joystick until Card Format is highlighted. Press the joystick to enter the Format submenu. Press the joystick to highlight No or Yes. If No is selected, no change will be made, and you will return to the Main Menu. If Yes is selected, ALL FILES will be deleted. Note: If MEMORY ERROR!is displayed on the LCD screen, this indicates that he internal memory or the memory card is corrupted. Please format the memory to continue. 38 RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS To restore the default settings in your camera: 1. [. . . ] · Please make sure you switch off the camera before you remove the SD card. · Do not open the battery/memory card door or remove the SD Memory Card while the camera is reading, writing or formatting the card. 63 REGULATORY INFORMATION REGULATORY INFORMATION FCC INFORMATION FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should be used. [. . . ]